Basic Operations
17
A
1
2
3
4
5
A
A
A
H
h
H
s
h
H
s
S
s
DOLBY NR
s
h
continued
Recording a CD/
SUPER VIDEO CD/
VIDEO CD
— CD Synchro Recording
The CD SYNC button lets you record the
audio from a CD/SUPER VIDEO CD/VIDEO
CD to a tape easily. You can use TYPE I
(normal) or TYPE II (CrO2) tapes. The
recording level is adjusted automatically.
1
Press
A
and insert a recordable tape
into deck B.
Place with the
side you want
to record
facing forward
To
Do this
Stop playback
Pause
Select a track
Find a point in
a track
Select a CD
in stop mode
Play only the
CD you have
selected
Play all CDs
Remove the CD
Change other
CDs while
playing a CD
Adjust the
volume
Tips
• Pressing
H
when the power is off automatically
turns the power on and starts CD playback if there
is a CD in the tray (One Touch Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
H
or the DISC 1~5 buttons (Automatic Source
Selection).
• If there is no CD in the player, “CD NO DISC”
appears in the display.
• When a disc tray holding a CD is selected (or is
playing), the DISC 1~5 button for that tray lights
green.
Note
Do not use force to close the disc tray, as this may
cause CD player trouble. Always close the tray by
pressing the appropriate CD 1~5
A
.
1
2
5
4
3
Press
s
(or
x
on the remote).
Press
S
(or
X
on the remote).
Press again to resume playback.
During playback or pause, turn
the jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it when
you reach the desired track. (Or
press
>
(to go forward) or
.
(to go back) on the
remote.)
Press
M
or
m
during
a track playback.
Press
H
(or CD
N
on the
remote) to stop searching at the
desired point.
Press a DISC 1~5 button (or D.
SKIP on the remote).
Press PLAY MODE repeatedly
until “1 DISC” appears.
Press PLAY MODE repeatedly
until “ALL DISCS” appears.
Press one of the CD 1~5
A
buttons.
Press one of the CD 1~5
A
buttons to open the tray that
contains the CD that you want
to change. When you change
the CD, press the same button
to close the tray. While the tray
is open, the DISC 1~5 button
indicator for that tray flashes
orange.
Turn VOLUME (or press VOL
+/– on the remote).