![background image](http://html.mh-extra.com/html/sony/mhc-gn77d/mhc-gn77d_operating-instructions-manual_1329997045.webp)
MHC-GN88D 4-248-439-
12
(1)
Tape
45
GB
Do This
Press PLAY MODE
repeatedly until “1 DISC” or
“ALL DISCS” lights up in
the display.
Press CLEAR on the remote
when playback is stopped.
Recording a disc by
specifying track order
— Program Edit
You can record tracks from all the discs in the
order you want. When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
1
Insert a recordable tape into deck B,
then press DVD.
2
Press PLAY MODE repeatedly until
“PGM” lights up in the display.
3
Press DISC SKIP-EXCHANGE (or
D.SKIP on the remote) or one of the
DISC 1~3 button to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 while “AL” appears in the
display.
4
Press
>
or
.
repeatedly until the
track number you want appears in the
display.
When programming an MP3 audio track,
press ALBUM + or – to select album, then
press
.
or
>
repeatedly until the track
number you want appears.
5
Press PUSH ENTER (or ENTER on the
remote).
The track(s) is (are) programmed. The
program step number appears.
6
To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press CD SYNC.
Deck B standby for recording. The REC
PAUSE/START indicator flashes.
8
Press DIRECTION repeatedly to select
“
g
” to record on one side. Select
“
j
” (or RELAY) to record on both
sides.
9
Press REC PAUSE/START.
Recording starts.
To
Cancel Program Edit
Clear a track from
the end of the program
Timer recording radio
programs
To timer-record, you must preset the radio
station (see “Presetting radio stations” on
page 41) and set the clock (see “Setting the
clock” on page 14) beforehand.
1
Tune in the preset radio station (see
“Listening to the radio” on page 42).
2
Press CLOCK/TIMER SET on the
remote.
“DAILY SET?” appears in the display.
3
Press
M
or
m
repeatedly to select
“REC SET?”, then press PUSH ENTER
(or ENTER on the remote).
“ON” appears and the hour indication
flashes in the display.
4
Set the time to start recording.
Press
M
or
m
repeatedly to set the hour,
then press PUSH ENTER (or ENTER on
the remote).
The minute indication starts flashing.
Press
M
or
m
repeatedly to set the minute,
then press PUSH ENTER (or ENTER on
the remote).
continued