![background image](http://html.mh-extra.com/html/sony/mhc-gn77d/mhc-gn77d_operating-instructions-manual_1329997036.webp)
MHC-GN88D 4-248-439-
12
(1)
36
GB
Speaker settings
— SPEAKER SETUP
To obtain the best possible surround sound, set
the size of the speakers you have connected and
their distance from your listening position.
Then use the test tone to adjust the volume and
the balance of the speakers to the same level.
Setting the speaker size and
distance
Use buttons on the remote for this operation.
1
Press DVD SETUP in stop mode.
The Setup Menu on the on-screen display
appears.
2
Press
M
or
m
repeatedly to select
“SPEAKER SETUP”, then press
ENTER.
3
Press
M
or
m
repeatedly to select
“SIZE” or “DISTANCE”, then press
ENTER.
4
Press
M
or
m
repeatedly to select the
setup item, then press ENTER.
5
Press
M
or
m
repeatedly to select or set
a setting, then press ENTER.
x
SIZE
When you do not connect center speaker,
surround speakers or sub woofer, or you move
the surround speakers, set the parameters for
CENTER, SURROUND and SUBWOOFER.
Since the front speaker setting is fixed, you
cannot change it.
FRONT
CENTER
SURROUND
SUBWOOFER
Notes
• Depending on the settings of other speakers, the sub
woofer may output the accessive sound.
• When you play a DVD that does not have sub
woofer output recorded, note that no sound is
produced from the sub woofer, even if
“SUBWOOFER” is set to “YES”.
• When connecting a sub woofer, make sure to set the
SUBWOOFER setting to “YES”. If set to “NONE”,
no sound is output from the sub woofer.
YES
YES: Normally select this position.
NONE: Select this when center
speaker is not used.
YES: Normally select this.
NONE: Select this when surround
speakers are not used.
NONE: Normally select this.
YES: Select this when an optional
sub woofer is used.