![background image](http://html.mh-extra.com/html/sony/mhc-gn1300d/mhc-gn1300d_operating-instructions-manual_1329994098.webp)
model name [MHC-GN1300D]
[4-132-091-
14
(2)] GB
98
GB
filename[D:\NORM'S JOB\SONY HA\SO0163\MHC-GN1300D_PMRF
01\4132091142_GB\GB120INF.fm]
masterpage:Left
PASSWORD
Parental Control is set.
PHOTO
The playback mode is “PHOTO” and the
JPEG image file is being played back.
Please Wait
• The system is doing initialization
process.
• The system is readying for usage of an
USB device.
Protected!
The USB device is write-protected.
Push STOP!
You have pressed the buttons whose
operation is only possible when playback
is stopped.
Reading
The system is reading information of the
disc or USB device. Some buttons are
not available.
REC Error
Transferring did not start, stopped
partway, or otherwise could not be
performed.
Track Full!
You cannot transfer onto the USB device
because the number of file has reached its
maximum.
UNLOCKED
The disc theft-preventive function is
released.
Precautions
Notes on discs
• Before playing, wipe the disc with a cleaning
cloth from the center out to the edge.
• Do not clean discs with solvents, such as
benzine thinner, or commercially available
cleaners or anti-static spray intended for vinyl
LPs.
• Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.
On cleaning discs, disc/lens cleaner
Do not use a commercially available cleaning
disc or disc/lens cleaner (wet or spray type).
These may cause apparatus to malfunction.
On operating voltage
Before operating the system, check that the
operating voltage of the unit is identical with the
voltage of your local power supply.
On safety
• The unit is not disconnected from the AC
power source (mains) as long as it is
connected to the wall socket, even if the unit
itself has been turned off.
• Completely disconnect the power cord (mains
lead) from the wall socket (mains) if it is not
going to be used for an extended period of
time. When unplugging the unit, always grip
the plug. Never pull the cord itself.
• Should any solid object or liquid get into the
system, unplug the system, and have it
checked by qualified personnel before
operating it again.
• The AC power cord can be changed only by a
qualified service facility.