Sony MDS-E12, Руководство по обслуживанию

Страница: 37 / 102

— 37 —
46
Editing Recor
ded MDs
Naming a Track or MD
(NAME)
You can enter a name for a recorded MD, as well as for
individual tracks. Names can consist of uppercase and
lowercase letters, numbers and symbols. A total number of
1,700 characters can be stored for all names on the MD.
MENU / NO
LEVEL / DISPLAY / CHAR
YES
AMS CLEAR /
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25 -
M.ACCESS
CONTINUE SHUFFLE PROGRAM
NAME CHAR
RM-DR1J
NUM
>
25
CLEAR
YES
NAME, CHAR, NUM
NENU / NO
LETTER/NUMBER
/
/
Notes
If you name a track while it is being recorded, be sure to
finish the naming operation before the track ends. If the
track ends before you finish, the entered character data
will be discarded and the tracks will remain unnamed.
Also, you can’t name tracks while the recorder is recording
over existing material.
Naming a Track or MD using the controls
on the recorder
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
2
Turn AMS until “Name?” appears in the display;
press AMS or YES.
3
Turn AMS until “Nm In?” appears, then press AMS
or YES.
When naming is being made during recording, the
cursor flashes and characters can be entered. Please
proceed to step 5.
4
Turn AMS until the track number (when naming a
track) to “Disc” (when naming the MD) flashes, then
press AMS or YES.
When the cursor flashes, characters can be entered. The
track number flashes, the track begins to play back
automatically so the track can be confirmed and the
track name entered.
N m I n T r 2 1
5
Press LEVEL/DISPLAY/CHAR repeatedly to select the
character type
To select Press repeatedly until
Uppercase letters “A” appears in the display
Lowercase letters “a” appears in the display
Numbers “0” appears in the display
Symbols* “’” appears in the display
*Symbols which can be used: ‘ _ /,.():!?& + <>_=”;#$%@ * `
A
N m I n T r 2 1
To enter a space
Press M while the cursor is flashing. However, the first
character of the name cannot be a space.
47
Editing Recor
ded MDs
6
Turn AMS to select the character.
The selected character flashes.
D
N m I n T r 2 1
To change a selected character
Repeat steps 5 and 6.
7
Press AMS.
The selected character is entered and is continuously
displayed. The cursor moves to the next position, and
again flashes.
D
N m I n T r 2 1
8
Repeat steps 5 to 7 to enter the rest of the name.
To change a character
Press m / M repeatedly until the character to be
changed flashes, then repeat steps 5 to 7.
To erase a character
Press m / M repeatedly until the character to be
erased flashes, then press CLEAR.
9
Press YES.
“Complete!” appears in the display, and the name is
entered.
To cancel the operation
Press MENU/NO or x .
Naming a track or MD using the remote Z
1
Naming a track or disc is done by the following
operations.
• Naming a track
While the track number is displayed and the recorder
is stopped, playing, paused or recording, press
NAME.
• Naming a disc
When the total number of tracks is displayed and the
recorder is stopped, press NAME.
The cursor flashes, and the characters can be entered.
2
Repeatedly press CHAR or NUM to select the
character type
Character type Display
Uppercase letters or symbols* “Selected AB”
Lowercase letters or symbols* “Selected ab”
Numbers or symbols “Selected 12”
* Symbols which can be used: _ / , . ( ) ! ?
3
Press letter/number to enter the characters
After you enter a character, the cursor shifts rightward
and waits for the input of the next character.
4
Repeat steps 2 and 3 to enter the rest of the name.
To change a character
Press m / M repeatedly until the character to be
changed flashes, press CLEAR to erase the character,
then repeat steps 2 and 3.
5
Press YES.
“Complete!” appears in the display, and the name is
entered.
To cancel the operation
Press MENU/NO or x .
48
Editing Recor
ded MDs
Copying names (Name Copy)
You can copy track or disc names to other tracks within the
disc.
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
2
Turn AMS (or press . / > repeatedly) until
“Name?” appears in the display; press AMS or YES.
3
Turn AMS (or press
.
/
>
repeatedly) until “Nm
Copy?” appears in the display; press AMS or YES.
4
Turn AMS (or press . / > repeatedly) until the
track name (when copying the track name) or “Disc”
(when copying the disc name) flashes in the display;
press AMS or YES.
When “No Name” is displayed
The selected track or disc has no name.
5
Turn AMS (or press
.
/
>
repeatedly) until to
the track number to be copied to (when naming a
track) or “Disc” (when naming a disc) flashes in the
display; press AMS or YES.
“Complete!” appears for a few seconds, and copying is
complete.
To cancel the operation
Press MENU/NO or x .
z When “Overwrite??” appears in step 5
A track name or disc name has already existed to the
target track. If you still want to copy the name, press
AMS or YES again while the indication is displayed.
Note
When a track name of a track recorded in MDLP (LP2 or
LP4) is copied onto a track recorded in stereo or monaural,
the “LP:” stamp indicating an MDLP recording is copied to
the beginning of the track and displayed.
Copying the same name to all tracks and
disc. (Name All Copy)
You can copy the same name simultaneously to all tracks
and disc on the MD.
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
2
Turn AMS until “Name?” appears in the display;
press AMS or YES.
3
Turn AMS (or press . / > repeatedly) until “NM
All Copy?” appears, then press AMS or YES.
4
Turn AMS (or press . / > repeatedly) until the
track name (when copying the track name) or “Disc”
(when copying the disc name) flashes in the display;
press AMS or YES.
When “No Name” is displayed
The selected track or disc has no name, and copying
cannot be completed. “Empty Name” will be
displayed.
5
Turn AMS (or press . / > repeatedly) until the
correct selection (below) appears; press AMS or
YES.
Name Selection
Only the section without a name Copy Only
(No Name) is copied No Name ?
All names are to be overwritten Copy All
Overwrite?
“Complete!” appears for a few seconds, and copying is
complete.
To cancel the operation
Press MENU/NO or x .
Note
• Copying of all names cannot use the “Undo?” function,
so make sure to be careful before completing the
copying.
• When a track name of a track recorded in MDLP (LP2 or
LP4) is copied onto a track recorded in stereo or
monaural, the “LP:” stamp indicating an MDLP
recording is copied to the beginning of the track and
displayed.
Adding date and time to the name of
recorded tracks (Auto Calender)
The internal clock in the recorder allows you to
automatically add the time and date to the name of tracks.
1
Press MENU/NO twice while the recorder is stopped
“Setup Menu” appears in the display.
2
Turn AMS (or press . / > repeatedly) until
“A.Calendar?” appears in the display; press AMS or
YES.
3
Turn AMS (or press . / > repeatedly) until the
correct selection (below) appears; press AMS or
YES.
Date and time is to be added Selection
to tracks
Yes On
No Off
4
Press MENU/NO.
Note
When adding the name of a track recorded by Auto
Calendar, be would not record the “LP:” stamp indicating
an MDLP recording.
49
Editing Recor
ded MDs
Renaming a track or MD Z
1
To rename a track or disc name, do the following:
• To rename a track
While the track number is displayed and the recorder
is stopped, playing, paused or recording, press
NAME.
• To rename a disc
When the total number of tracks is displayed and the
recorder is stopped, press NAME.
The disc name is displayed.
2
Press CLEAR, and the displayed track name or disc
name is erased.
3
Rename the track or disc. Do steps 5 to 8 of
“Naming a track or MD using the controls on the
recorder” on page 46, or steps 2 to 4 or “Naming a
track or MD using the remote” on page 47.
4
Press NAME
Erasing a track or disc name (Name Erase)
Use this function to erase the name of a track or disc.
1 Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
2 Turn AMS (or press . / > repeatedly) until
“Name?” appears in the display; press AMS or YES.
3 Turn AMS (or press
.
/
>
repeatedly) until “Nm
Erase?” appears in the display; press AMS or YES.
4 Turn AMS (or press . / > repeatedly) until the
track number (when the erasing the track name) or
“Disc” (when erasing the disc name) flashes; press
AMS or YES.
“Complete!” appears for a few seconds, and the name
is erased.
To cancel the operation
Press MENU/NO or x .
Erasing all names on the MD (Name All
Erase)
You can erase all the track names and disc name on an MD
in a single operation.
1
Press MENU/NO while the recorder is stopped,
playing, or paused.
“Edit Menu” appears in the display.
2
Turn AMS (or press . / > repeatedly) until
“Name?” appears in the display; press AMS or YES.
3
Turn AMS (or press . / > repeatedly) until “Nm
All Ers?” appears in the display; press AMS or YES.
“Nm All Ers??” appears in the display.
4
Press AMS or YES.
“Complete!” appears for a few seconds, and all names
on the MD are erased.
To cancel the operation
Press MENU/NO or x .
z
All the recorded tracks and names of an MD can also be
erased at the same time
For details, see “Erasing all the tracks on an MD” on
page 42.