Sony MDR NC60 - Headphones - Binaural, Руководство по обслуживанию

Страница: 6 / 26

MDR-NC60
6
2-5. HANGER (L/R)
2-6. HOUSING CAP (L/R)
7 hanger (L)
6 hanger stopper (L)
1 Remove the cord from the
groove in the hanger.
5 Rotate this part of hanger
so that it comes to the
position shown,
and then remove from the
hanger stopper.
4 swivel plate
3 swivel spring
2 two screws
head band section
NG OK
slider
Never draw out the cord
when the slider is extended.
The cord may be drawn out
when the slider is not extended.
POINT TO NOTES
Note: Use the same method as that on the L side when removing the hanger (R).
1 screw (B1.4)
2 Pull up the housing cap (L) from the side
where the screw was removed.
3
housing cap (L)
front plate (L) assy
4 two cap housing adhesive sheets
Note: Use the same method as that on the L side when removing the housing cap (R).
Note: Cap housing adhesive sheets cannot re-used.
Please replace to brand-new part ones
cap housing adhesive sheets is removed.