Sony KP-HR432K90, Руководство по обслуживанию

Страница: 32 / 364

– 32 –
KP-HR432K90/HR532K90/HR532N90/HW572K90
RM-Y909K RM-Y908 RM-Y909K RM-Y909K
ERROR CODE LIST
ERROR
DESCRIPTION REMEDY
CODE
00 No Error
10 Sensor 0 low output Check sensor 0, connection/wiring, circuit, and pattern position
(Is pattern over sensor ?) Adjust “64 VUP” if necessary.
11 Sensor 1 low output Check sensor 1, connection/wiring, circuit, and pattern position
(Is pattern over sensor ?) Adjust “69 HLB” if necessary.
12 Sensor 2 low output Check sensor 2, connection/wiring, circuit, and pattern position
(Is pattern over sensor ?) Adjust “73 HRIV” if necessary.
13 Sensor 3 low output Check sensor 3, connection/wiring, circuit, and pattern position
(Is pattern over sensor ?) Adjust “68 VLOW” if necessary.
20 Sensor 0 high output Check sensor 0 and circuit.
21 Sensor 1 high output Check sensor 1 and circuit.
22 Sensor 2 high output Check sensor 2 and circuit.
23 Sensor 3 high output Check sensor 3 and circuit.
30 V CENT or SKEW adjustment Check “66 VMID” data and check registration condition.
loop overflow
31 H CENT or SKEW adjustment Check “71 HMID” data and check registration condition.
loop overflow
32 H LIN or SIZE adjustment Check “71 HMID” data and check registration condition.
loop overflow
40 V CENT regi data overflow Check “66 VMID” data and confirm V CENT data (all mode) is not near 511.
41 H CENT regi data overflow Check “71 HMID” data and confirm H CENT data (all mode) is not near 511.
42 V SKEW regi data overflow Check “66 VMID” data and confirm V SKEW data (all mode) is not near 511.
43 H SKEW regi data overflow Check “71 HMID” data and confirm H SKEW data (all mode) is not near 511.
44 H LIN regi data overflow Check “71 HMID” data and confirm H CENT data (all mode) is not near 511.
45 H SIZE regi data overflow Check “71 HMID” data and confirm H CENT data (all mode) is not near 511.
50 V CENT regi data overdrow Check “66 VMID” data and confirm V CENT data (all mode) is not near –512.
51 H CENT regi data overdrow Check “71 HMID” data and confirm H CENT data (all mode) is not near –512.
52 V SKEW regi data overdrow Check “66 VMID” data and confirm V SKEW data (all mode) is not near –512.
53 H SKEW regi data overdrow Check “71 HMID” data and confirm H SKEW data (all mode) is not near –512.
54 H LIN regi data overdrow Check “71 HMID” data and confirm H CENT data (all mode) is not near –512.
55 H SIZE regi data overdrow Check “71 HMID” data and confirm H CENT data (all mode) is not near –512.
60 H or V CENT offset overflow Check “71 HMID” data and check “66 VMID” data.
61 H or V SKEW offset overflow Check SKEW adjustment.
62 H SIZE or LIN offset overflow Check “71 HMID” data, check “66 VMID” data and check SIZE and LIN adjustment.
70 H or V CENT offset overdrow Check “71 HMID” data and check “66 VMID” data.
71 H or V SKEW offset overdrow Check SKEW adjustment.
72 H SIZE or LIN offset overdrow Check “69 HLB” data, check “73 HRIV” data and check SIZE and LIN adjustment.
80 SIZE limit error Check that H SIZE is negative and not near zero.
0 : UPPER SENSOR
1 : LEFT SENSOR
2 : RIGHT SENSOR
3 : LOWER SENSOR
SCREEN
0
3
1 2
[SENSOR POSITION]
PJE 62 213
ERR
Color:
0=Green
1=Red
2=Blue
0-Green
1-Red
2-Blue
Example: Blue low Level Sensor 3
ERROR EXAMPLE
AUTO REGI ERROR CODE FORMAT
Error Code:
(See Error List)
Error codes in normal (customer) mode are not
displayed. You must enter PJED service mode to
see to the error code.
ERROR G
LO LEVEL S3
SENSOR POSITIONS
1 2
0
3
When executing flash focus in service mode, the
error will be displayed in text format (see below).