14
Running initial setup
1
Complete your cable connections
before proceeding with the
Initial
Setup
.
Connect the TV to your nearest power
outlet.
2
Check the
ENERGY SAVING
SWITCH
setting is on (
z
).
3
Press
1
on the TV.
When you switch the TV on for the first
time, the
Language
menu appears on
the screen.
~
•
The TV image shown here may differ from your
TV but the operation of your TV remains the same
as indicated.
4
Follow the instructions on the screen.
~
•
The
ENERGY SAVING SWITCH
must be on
(
z
) to set the clock and obtain program
information for the TV Guide.
•
Home
mode sets the TV to display the settings
optimized for home viewing (this setting is
ENERGY STAR compliant).
5
Select
Continue
to scan for available
channels and enable the
TV Guide On
Screen
®
feature. If you receive
channels from a cable box or satellite
receiver and do not wish to use the
TV’s built-in tuner, select
Skip
.
Selecting
Skip
will disable the
TV
Guide On Screen
feature, which is
only available when the TV’s tuner is
used.
~
•
If you skip the channel scan while in the setup
menus, TV Guide will be disabled.
Detaching the Table-Top
Stand from the TV
Remove only the screws marked with
on
the TV.
~
•
The NX700/NX800 series models must remove
the stand rear cover prior to detaching the Table-
Top Stand.
•
Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
•
When installing the TV on a wall, remove the four
screws from the rear of the TV. (They are fastened
in the screw holes for wall mounting.) Be sure to
store the removed screws in a safe place, keeping
them away from children (for KDL-60/52NX801
and KDL-60/52/46NX800 models).
•
When attaching the Table-Top Stand again, be
sure to fasten the four screws (previously
removed) to the original holes on the rear of the
TV (for KDL-60/52NX801 and KDL-60/52/
46NX800 models).
