5
Programming the Remote Control
Your remote control can be programmed to use other equipment and is pre-programmed to operate
the following Sony equipment.
Programming Other Equipment
Confirm the Programming
If you can turn your equipment on and off using the green
POWER
button, the programming is
complete. If not, try the next code listed.
~
• In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s
own remote control.
• Any of the function buttons (
DVD
,
AMP
,
STB
) can be programmed to operate other equipment regardless of
the labeling. For example, if programmed with the correct code, a Blu-ray Disc player can be operated with
the
DVD
button. This is useful if your equipment does not match any of the labeled buttons.
To reset the remote control to the factory default:
Press
SCENE
,
TV POWER
, and
simultaneously. The four function buttons (
DVD
,
AMP
,
STB
,
and
TV
) blink when successfully reset.
Follow the steps below to program your TV remote control.
1
Look for the code in the Manufacturer’s Code List (refer to i-Manual) that
corresponds to the equipment you would like to operate with the Sony
remote control. If more than one code is provided, try programming the
first code listed. If your equipment’s code is not listed, visit
http://esupport.sony.com/remotecodes for a more comprehensive list.
2
Press and hold a
DVD
,
AMP
or
STB
function button simultaneously with
INPUT
button and release.
When in the programming mode, the function button (
DVD
,
AMP
,
STB
)
blinks for approximately 30 seconds until a code is entered.
3
Enter the five digit code using
-
while the function buttons
(
DVD
,
AMP
,
STB
) are lit. If the code is not entered within 30 seconds,
you must repeat step 2.
4
Press
or
ENT
to confirm the code. If successfully programmed, the
function button (
DVD
,
AMP
,
STB
) will blink twice, if not, it blinks five
times.
Function Button
Sony Equipment Code Number
DVD
DVD Player
31033
AMP
Receiver
52172
STB
Digital Satellite
01639
3
2
2
4
4
