Sony KDF-E42A10, Руководство по обслуживанию

Страница: 164 / 241

Other Information
92
D:\WINNT\Profiles\fujii\Desktop\Troy book source\2597544111c20_TROY
Source data\01US08OTH.fm masterpage:3 columns Right
KDF-E42A10/KDF-E50A10
2-597-544- 11 (1)
Audio
Channels
Problem Possible Remedies
Good picture, no sound
❏
Press
MUTING
so that
Muting
disappears from the screen (see page 44).
❏
Make sure the
Speaker
option is set to
On
in the Audio setting (see page 67).
❏
Make sure the
MTS
option is set to
Stereo
or
Mono
(see page 67).
❏
When the HDMI IN input is in use, surround sound, such as AC-3 and DTS,
cannot be input. Change the sound setting for the external input device to Linear
PCM.
Audio noise
❏
Communication problems may occur if infrared communication equipment (e.g.,
infrared cordless headphones) is used near the TV. Use headphones other than
infrared cordless headphones. Also, if you use infrared communication equipment
other than infrared cordless headphones, move the infrared transceiver away from
the TV until the noise is eliminated, or move the transmitter and receiver of the
infrared communication equipment closer together.
Cannot gain enough volume
when using a cable box
❏
Increase the volume of the cable box using the cable box’s remote control. Then
press
TV ( FUNCTION) once (the TV indicator lights up) and adjust the TV’s
volume.
Sound seems weak or
insufficient
❏
The TV’s audio might be set to
Auto SAP
or
Mono
, when it might be better set to
Stereo
. In the Audio setting (see page 67), set the
MTS
setting to
Stereo
. If
already set to
Stereo
, switch to
Mono
(which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external speakers
❏
If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system), use your audio receiver to adjust
the sound (see page 67). Or, to use the TV remote control, set the
Audio Out
option to Variable .
❏
To turn on the TV speakers, set the Speaker option to On (see page 67).
Problem Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna
❏
Press ANT to select the VHF/UHF input (see page 44).
❏
Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV’s memory (see page 72).
Cannot receive any channels
when using cable TV
❏
Use Auto Program in the Channel setting to add receivable channels that are not
presently in the TV’s memory (see page 72).
❏
Press ANT to select the CABLE input (see page 44).
Cannot receive or select
channels
❏
Use Auto Program in the Channel setting to add receivable channels that are not
presently in TV memory (see page 72).
Some digital cable channels are
not being displayed
❏
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
❏
The digital cable channel may be set to Hidden in the Channel setting (see page
72).