Sony KD-36FS130 - 36" Fd Trinitron Wega, Руководство по эксплуатации

Страница: 13 / 70

11
R
e
m
o
te
C
ont
ro
l
Programming the Remote Control
If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR
combination unit) that you want to control with the TV’s remote control, use the following
procedure to program the remote control.
1
Check the list of “Manufacturer’s Codes” on page 12 and find the three-digit code number
for the manufacturer of your component. If more than one code number is listed, use the
number listed first.
2
Press .
3
Press or
FUNCTION
button to indicate the type of component you want to
program with the remote control.
4
Use the buttons to enter the three-digit manufacturer’s code number.
5
Press .
6
To check if the code number works, aim the TV’s remote control at the component and
press the green
POWER
button (
VCR/DVD
,
SAT/CABLE
) that corresponds with that
component. If it responds, you are done. If not try using another code listed for that
manufacturer.
✍
The and
FUNCTION
button flash when you press .
✍
You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3.
✍
If you have problems programming your remote control, see the remote control troubleshooting
section on page 60.
0 9
01US01COV-BR2.book Page 11 Monday, March 28, 2005 1:36 PM