Sony KD-36FS130 - 36" Fd Trinitron Wega, Руководство по эксплуатации

Страница: 51 / 70

49
An
a
lo
g
M
e
nus
Using the Timer Menu
Timer 1
Timer 2
Scheduled
viewing
Timer functions apply to analog channels only. You cannot set the Timer for
digital channels.
Use the timers to program your TV to turn on and off by day, time,
duration, and channel. The timer duration is a maximum of six hours.
When the channel is fixed, it is not necessary to set the channel.
1 Use the
F
or
f
buttons to highlight Timer 1 or Timer 2 , then press
.
2 Use the
F
or
f
buttons to enter the desired day, start time, duration,
and channel, then press . The timer status should be On when the
Timer has been set, and the timer light on the front panel of the TV
should be on.
3 Press to exit the menu.
Current Time Set your TV to the current day and time. Press to open the Current
Time menu:
1 Use the
F
or
f
buttons to enter the correct day and time, then press
.
2 Press to exit the menu.
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.
T i m e r 1 : S e t
C u r r e n t T i m e
T i m e r 2 : S e t
Timer
Move Select End
To access the Timer menu, use the following steps:
To Display To Highlight To Select
EXIT
✍
Select Off to turn off the Timer. Your previous settings will be saved.
EXIT
✍
You must set the Current Time before you can use Timer 1 or Timer 2.
01US01COV-BR2.book Page 49 Monday, March 28, 2005 1:36 PM