Ad
minis
tra
ting t
he Camer
a
Setting the Camera Image and Audio — Video / Audio Menu
30
Timer
Normally the camera works in day mode. It switches to
night mode at the time you set in
Timer
of
Day/Night
in
the Schedule menu.
Sensor input
Controls the day/night mode by synchronizing it with
the sensor input.
Select the synchronized sensor from
Sensor input 1,
Sensor input 2, Sensor input 3
and
Sensor input 4
.
While a sensor input is detected, the camera works in
night mode.
Status
Displays the day/night function status.
Near-IR compensation
Adjust background light when using the IR lamp or
where there is much near short infrared ray. Select the
checkbox to increase the accuracy of auto-focus in night
mode.
OK/Cancel
See “Buttons common to every menu” on page 21.
Privacy masking Tab
Using the privacy masking enables you to hide images
by masking specified parts of the images when
streaming.
Note
Perform the following before setting the privacy
masking.
• Deselect the checkbox of
Stabilizer
in the Installation
tab of the System menu. After setting the privacy
masking, set the
Stabilizer
function again.
Preview screen
This screen is for monitoring images and configuring
privacy masking.
You can move the position of the privacy mask displayed
on the preview screen by drag and drop.
Effect
Set the effect of privacy masks.
Color
Specify the color of privacy masks. This setting is
common to every privacy mask.
Position
Select the number corresponding to the display position
on the preview screen.
After completing the configuration, register by clicking
OK
.
Clear
Click the button to delete the privacy mask set in
Position
.
Clear all
Click the button to delete all privacy mask.
Call
Click the button to move the privacy mask set in
Position
to the center of the image.
Setting a privacy mask
Operate according to the following procedure to set a
privacy mask in the position of your choice:
1
Select the number to register from the
Position
drop-down list.
2
Specify the privacy mask area by dragging the
mouse on the preview screen.
3
Select the effect and color of the mask from the
Effect
and
Color
drop-down list.
Note
The color is common to every privacy mask. The
color selected last is applied.
4
Click
OK
.
The mask is displayed on the preview screen.
Notes
• The mask cannot be set on the viewer by clicking
OK
if the camera is tilted 65°.
• If you change the direction of the camera, the mask
may not cover the object properly. Ensure the Privacy
masking area is sized sufficiently beforehand.
• The color is common to every privacy mask. The color
selected last is applied.
Содержание Ipela SNC-WR600
Страница 71: ...Sony Corporation ...
