GB
22
Assigning the IP Address to the Camera
10
Type the Administrator name
and Administrator password.
The default settings of both items are
“admin.”
You cannot change the Administrator
name and Administrator password in this
step. To change these items, see “Setting
the User – User Menu” of the User’s Guide
stored in the supplied CD-ROM.
11
Confirm that all items are
correctly set, then click OK.
If “Setting OK” is displayed, the IP
address is correctly assigned.
12
To access the camera directly,
double-click the camera name in
the list.
The factory setting of the camera network
is as follows.
IP address: 192.168.0.100
Subnet mask: 255.0.0.0
Wireless LAN setting
Type: Adhoc
SSID: snc-rx550
Channel: 11 ch
WEP: nothing
IP address: 10.0.0.100
Subnet mask: 255.0.0.0
The welcome page of the network
camera is displayed on the web browser.
If the IP address is not set correctly, the
welcome page does not appear after step 12. In
this case, try to set the IP address again.
Note
Tip
Note
