Sets the recording format for the time code on the recording medium.
UB Time Rec:
Sets whether or not to record the time as a user bit.
How to set the time code (TC Preset)
How to reset the time code
You can also reset the time code (00:00:00:00) using the RMT-VP1K remote commander (sold
separately).
How to set the user bit (UB Preset)
How to reset the user bit
How to select the recording method for the time code (TC Format
*1
)
DF:
Records the time code in Drop Frame
*2
format.
NDF:
Records the time code in Non-Drop Frame format.
The setting is fixed to [NDF] when recording in 4K/24p or 1080/24p.
MENU
→
(Setup)
→
[TC/UB Settings]
→
[TC Preset].
1.
Press the multi-selector up/down and select the first two digits.
The time code can be set between the following range.
When [60i] is selected: 00:00:00:00 to 23:59:59:29
2.
When [24p] is selected, you can select the last two digits of the time code in multiples of four from 0 to 23
frames.
When [50i] is selected: 00:00:00:00 to 23:59:59:24
*
Set the other digits following the same procedure as in step 2, then press in the center of the
multi-selector.
3.
MENU
→
(Setup)
→
[TC/UB Settings]
→
[TC Preset].
1.
Press the
(Delete) button to reset the time code (00:00:00:00).
2.
MENU
→
(Setup)
→
[TC/UB Settings]
→
[UB Preset].
1.
Press the multi-selector up/down and select the first two digits.
2.
Set the other digits following the same procedure as in step 2, then press in the center of the
multi-selector.
3.
MENU
→
(Setup)
→
[TC/UB Settings]
→
[UB Preset].
1.
Press the
(Delete) button to reset the user bit (00 00 00 00).
2.
MENU
→
(Setup)
→
[TC/UB Settings]
→
[TC Format].
1.
Only when [NTSC/PAL Selector] is set to NTSC.
*1
The time code is based on 30 frames per second. However, a gap between the actual time and the time code will
occur during extended periods of recording as the frame frequency of the NTSC image signal is approximately
29.97 frames per second. Drop frame corrects this gap to make the time code and actual time equal. In drop
frame, the first 2 frame numbers are removed every minute except for every tenth minute. The time code without
this correction is called non-drop frame.
*2
Содержание ILCA-99M2
Страница 413: ......