value towards the positive side, and lighter as you decrease the value towards the negative
side. This function is effective even if you set [Color Mode] to [Black & White].
[R] -7 (light red) to +7 (deep red)
[G] -7 (light green) to +7 (deep green)
[B] -7 (light blue) to +7 (deep blue)
[C] -7 (light cyan) to +7 (deep cyan)
[M] -7 (light magenta) to +7 (deep magenta)
[Y] -7 (light yellow) to +7 (deep yellow)
Detail
Sets items for [Detail].
Level: Sets the [Detail] level. (-7 to +7)
Adjust: The following parameters can be selected manually.
Mode: Selects auto/manual setting. (Auto (automatic optimization) / Manual (The details are
set manually.))
V/H Balance: Sets the vertical (V) and horizontal (H) balance of DETAIL. (-2 (off to the
vertical (V) side) to +2 (off to the horizontal (H) side))
B/W Balance: Selects the balance of the lower DETAIL (B) and the upper DETAIL (W).
(Type1 (off to the lower DETAIL (B) side) to Type5 (off to the upper DETAIL (W) side))
Limit: Sets the limit level of [Detail]. (0 (Low limit level: likely to be limited) to 7 (High limit
level: unlikely to be limited))
Crispning: Sets the crispening level. (0 (shallow crispening level) to 7 (deep crispening
level))
Hi-Light Detail: Sets the [Detail] level in the high intensity areas. (0 to 4)
To copy the settings to another picture profile number
You can copy the settings of the picture profile to another picture profile number.
MENU
→
(Camera Settings1)
→
[Picture Profile]
→
[Copy].
To Reset the picture profile to the default setting
You can reset the picture profile to the default setting. You cannot reset all picture profile
settings at once.
MENU
→
(Camera Settings1)
→
[Picture Profile]
→
[Reset].
Note
Since the parameters are shared for movie and still images, adjust the value when you change the
shooting mode.
If you print RAW images with shooting settings, the following settings are not reflected:
Black Level
Black Gamma
Knee
Color Depth
When the [
Record Setting] is [120p 100M]/[100p 100M] or [120p 60M]/[100p 60M], [Black
Gamma] is fixed at “0” and cannot be adjusted.
Содержание ILCA-99M2
Страница 413: ......