Sony IFB-X2000E, Руководство по обслуживанию

Страница: 22 / 306

1-16
30
(GB)
The SET SETTING menu is used for changing the
initial settings of the projector. Unadjustable items are
not displayed in the menu.
SET SETTING
SPEAKER:
LANGUAGE:
INSTALLATION:
POWER SAVING:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
0 1
0 1
ON
ON
ENGLISH
FLOOR-FRONT
FRONT&REAR
INPUT-A
STATUS: AT
OFF
Operation
1. Select an item
Use the V or v key to select the item, then press the
b
key or the ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the number, press the
V
or
b
key.
To decrease the number, press the v or B key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the V or v key to change the setting, then press
the B or the ENTER key.
The original screen is restored.
STATUS
Sets up the on-screen display.
SET SETTING
SPEAKER:
LANGUAGE:
INSTALLATION:
POWER SAVING:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
0 1
0 1
ON
ON
ENGLISH
FLOOR-FRONT
FRONT&REAR
INPUT-A
STATUS:
OFF
ON
OFF
ON: Shows all of the on-screen displays.
OFF: Turns off the on-screen displays except for the
menus and warning messages.
The SET SETTING Menu
SPEAKER
Set to OFF to cut off the sound of the internal speaker
when external speakers are connected. When set to
OFF, “SPEAKER OFF” appears on the screen when
you turn on the power.
SET SETTING
STATUS:
LANGUAGE:
INSTALLATION:
POWER SAVING:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
0 1
0 1
ON
ON
ENGLISH
FLOOR-FRONT
OFF
FRONT&REAR
INPUT-A
ON
OFF SPEAKER:
LANGUAGE
Selects the language used in the menu and on-screen
displays.
0 1
0 1
POWER SAVING: OFF
FRONT&REAR
CEILING-FRONT
FLOOR-FRONT
SET SETTING
STATUS:
SPEAKER:
LANGUAGE:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
ON
ON
ENGLISH
FRANCAIS
DEUTSCH
ITALIANO
ESPANOL
INPUT-A
INSTALLATION:
Available languages are: English, French, German,
Italian, Spanish, Japanese and Chinese.
INSTALLATION
Reverses the picture horizontally or vertically.
SET SETTING
STATUS:
SPEAKER:
LANGUAGE:
POWER SAVING:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
0 1
0 1
ON
ON
ENGLISH
FLOOR-FRONT
OFF
FRONT&REAR
INPUT-A
INSTALLATION:
CEILING-FRONT
FLOOR-FRONT
FLOOR-REAR
CEILING-REAR
FLOOR-FRONT: The picture is not reversed.
CEILING-FRONT: The picture is reversed
horizontally and vertically.
FLOOR-REAR: The picture is reversed horizontally.
CEILING-REAR: The picture is reversed
vertically.
Note
In case of using a mirror, be careful of installation
since the picture may be reversed.
31
(GB)
POWER SAVING
When set to ON, the projector goes into the power
saving mode and the lamp for light source turns off if
no signal is input for about 10 minutes.
The power saving mode is canceled when a signal is
input or any key is pressed.
SET SETTING
STATUS:
SPEAKER:
LANGUAGE:
INSTALLATION:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
0 1
0 1
ON
ON
ENGLISH
FLOOR-FRONT
OFF
FRONT&REAR
INPUT-A
OFF
ON POWER SAVING:
SIRCS RECEIVER
Selects the remote control detectors to be activated.
Change the setting if the wireless Remote Commander
does not work properly due to the influence of the
fluorescent lamp, etc.
SET SETTING
STATUS:
SPEAKER:
LANGUAGE:
INSTALLATION:
POWER SAVING:
GROUP INDEX:
DEVICE INDEX: 0 1
0 1
ON
ON
ENGLISH
FLOOR-FRONT
OFF
FRONT&REAR
INPUT-A
SIRCS RECEIVER: FRONT&REAR
FRONT
REAR
OFF
FRONT & REAR: Activates both the front and rear
detectors.
FRONT: Activates the front detector only.
REAR: Activates the rear detector only.
OFF: Activates neither the front nor rear detector.
Note
When set to OFF, the wireless Remote Commander
does not function. Use the keys on the control panel or
the wired Remote Commander.
GROUP INDEX
Groups multiple projectors or switchers to operate
them simultaneously.
GROUP INDEX: 0 1
You can set the group index number to the desired
number between 01 and 99.
DEVICE INDEX
Displays the index number set with the INDEX
switches on the rear of the projector. You cannot set
the device index number with this menu.
SET SETTING
STATUS:
SPEAKER:
LANGUAGE:
INSTALLATION:
POWER SAVING:
SIRCS RECEIVER:
GROUP INDEX: 0 1
0 1
ON
ON
ENGLISH
FLOOR-FRONT
OFF
FRONT&REAR
INPUT-A
DEVICE INDEX:
For details for setting the number, see page 45 (GB).