Sony IFB-X2000E, Руководство по обслуживанию

Страница: 17 / 306

1-11
20
(GB)
0
INPUT C INPUT B INPUT A VIDEO
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
+
–
:
1
Connecting with a Computer or a VCR
This section describes how to connect the projector with a computer, VCR,
and external active speakers. For details on how to connect other
equipment, see pages 42 (GB) to 44 (GB).
Also refer to the instruction manuals of the equipment to be connected.
When making connections, be sure to:
• turn off all equipment before making any connections.
• use the proper cables for each connection.
• insert the plugs of the cables properly; plugs that are not fully inserted
often generate noise. When pulling out a cable, be sure to pull it out by
the plug, not the cable itself.
Note on the VPL-X2000E model
The optional IFB-X2000E interface board is required for using the VIDEO
connectors.
Note
Set INPUT-A in the SIGNAL SELECT menu to RGB.
For details, see page 32 (GB).
VCR
to S VIDEO OUT
to
VIDEO
OUT
to AUDIO OUT
S video cable
(not supplied)
Video cable (not supplied)
Audio cable
(not supplied)
Rear
to a wall outlet
AC power cord
(supplied)
to AC IN
SMF-400 Monitor cable
(5BNC
˜ HD D-sub 15-pin)
(not supplied)
Use the optional ADP-20
Signal adapter when
connecting with a Macintosh
computer.
Computer
Audio cable
(not supplied)
Active speakers
Signal flow
Audio cable
(not supplied)
21
(GB)
Projecting
1
Press the ON key on the Remote Commander or the control panel.
The ON indicator lights in green.
2
Turn on the power of equipment connected to the projector. Press the
INPUT SELECT keys on the Remote Commander or the control panel
to select the input source.
VIDEO: Selects the video signal input from the VIDEO or S VIDEO
connectors and the audio signal input from the AUDIO IN L/R
jacks. To switch the VIDEO or S VIDEO connectors, use the
SELECT key.
SELECT: Each time you press this key, the input signal is switched
between VIDEO and S VIDEO.
INPUT A: Selects the audio and video signals input from the INPUT
A connectors.
INPUT B: Selects the signal input from the connectors on the optional
interface board which is installed in the INPUT B section.
INPUT C: Selects the signal input from the connectors on the optional
interface board which is installed in the INPUT C section.
(Continued)
0 0
INPUT C INPUT B
INPUT A VIDEO
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
+
–
SELECT
VIDEO MEMORY
SWITCHER INDEX
PIC ON AUDIO OFF
PATTERN FOCUS ZOOM SHIFT
NORMAL
MUTING STATUS
LCD LENS CONTROL
ON
COMMAND
OFF
SIZE DOT PHASE
APA
SHIFT
RGB
R
B
CENT
ON STANDBY
MEMORY MENU
VIDEO
INPUT SELECT
A D B C
BLKG SYS SET RESET PUNCTION
1 4 2 3
5 8 6 7
9 10/0(ALL)
SW NO/
OFF/GBOUP
SWITCHER/VIDEO MEMORY /INDEX NO
ENTER
POSITION BRIGHT CONTR
PICTURE CONTROL
HUE COLOR SHARP VOLUME
VIDEO/S VIDEO
LIGHT
+
–
ON
STANDBY
PIC AUDIO
VIDEO
POWER SAVING
COVER FAIL
FAN FAIL
LAMP FAIL
1 2
3 4
HIGHT TEMP
SELECT
VOLUME
INPUT A INPUT B INPUT C
APA
MENU
ENTER RESET
PATTERN ZOOM SHIFT FOCUS
MUTING
INPUT SELECT
LIGHT
RESET SYS SET
+
Rear remote control detector
STANDBY indicator
ON indicator
1
4,5,6,7
7
4,6
5
2
4,6
1
4,5,6,7
7
5
3,8
3,8
2
2
2