Sony IFB-X2000E, Руководство по обслуживанию

Страница: 8 / 306

1-2
2
(GB)
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
For the customers in the USA
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
For the customers in Canada
This Class A digital apparatus complies with Canadian ICES-
003.
For the customers in the United Kingdom
WARNING
THIS APPARATUS MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with
the following code:
Green-and-yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be
connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol
Y or coloured green or
green-and-yellow.
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
Voor de klanten in Nederland
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
The socket-outlet should be installed near the equipment
and be easily accessible.
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
English
WARNING
3
(GB)
GB
English
Table of Contents
Overview
Precautions ............................................................... 4 (GB)
Features ..................................................................... 6 (GB)
Location and Function of Controls ......................... 8 (GB)
Front .............................................................................. 8 (GB)
Rear ............................................................................. 12 (GB)
Remote Commander ................................................... 14 (GB)
Setting up and projecting
Precautions on Installation .................................... 18 (GB)
Installing the Projector on the Floor ..................... 19 (GB)
Connecting with a Computer or a VCR ................ 20 (GB)
Projecting ................................................................ 21 (GB)
Adjustments and settings
using the menu
Using the Menu ....................................................... 24 (GB)
The PICTURE CTRL Menu ..................................... 25 (GB)
The INPUT SETTING Menu .................................... 27 (GB)
The SET SETTING Menu ........................................ 30 (GB)
The SIGNAL SELECT Menu ................................... 32 (GB)
Installation/connection
examples/Index number setting
Installation Examples ............................................. 33 (GB)
About the Picture Size ................................................. 33 (GB)
Floor Installation ......................................................... 34 (GB)
Ceiling Installation ...................................................... 38 (GB)
Connection Examples ............................................ 42 (GB)
Connecting 15k RGB/Component Equipment ............ 42 (GB)
Connecting the Switcher ............................................. 43 (GB)
Confirming the System Construction .......................... 44 (GB)
Setting the Index Numbers .................................... 45 (GB)
Maintenance
Maintenance ............................................................ 48 (GB)
Replacing the Lamp .................................................... 48 (GB)
Cleaning the Air Filter ................................................. 49 (GB)
Troubleshooting ..................................................... 50 (GB)
Others
Specifications ......................................................... 52 (GB)
Index ........................................................................ 59 (GB)