10
Removing the unit
b
Notes
• Remove the battery pack and the DC power
cable from the DC IN of the AXS-R5 before
removing the AXS-R5 from the unit.
1
Press the release button of the AXS-R5
and raise the ejection lever to disengage,
then remove the AXS-R5 by pulling it
out while sliding upward.
2
Remove the BNC cable from the unit.
b
Notes
• Remove the AXS-R5 while supporting the unit
by hand.
1
Open the cover by sliding the
memory slot cover open/close
button on the top of the AXS-R5.
2
Insert the AXS memory card into
the card slot with the label facing
as indicated below.
3
Close the cover.
Inserting an AXS memory card
Label
Step 2: Connecting the unit to the AXS-R5 and NEX-FS700 series
(Continued)