8
Step 2: Connecting the unit to the AXS-R5 and
NEX-FS700 series
1
Press the release button (
1
) of
the AXS-R5 to pop up the ejection
lever, then raise the ejection lever
(
2
).
2
Insert the projection of the AXS-
R5 into the slot on the rear of the
unit (
1
), then lower the ejection
lever (
2
).
The unit connects to the AXS-R5.
• Before you connect the unit or the AXS-R5 to
another device, or remove it from another
device, make sure that the battery pack and the
DC power cable of the DC IN connector are
disconnected from the AXS-R5.
NEX-FS700 series
BNC cable
HXR-IFR5 (this unit)
Battery pack
AXS-R5