36
US
Bring the Sound Bar and the
BLUETOOTH device closer together.
Pair the Sound Bar and BLUETOOTH
device again. You may need to cancel
the pairing with the Sound Bar using
your BLUETOOTH device first.
Pairing information may be deleted.
Perform pairing operation again
(page 26).
Sound of the connected
BLUETOOTH mobile device is not
output from the Sound Bar.
Make sure that the BLUETOOTH
indicator on the Sound Bar is lit
(page 27).
Bring the Sound Bar and the
BLUETOOTH device closer together.
If a device that generates
electromagnetic radiation, such as a
wireless LAN device, other
BLUETOOTH devices, or a microwave
oven is nearby, move the device away
from the Sound Bar.
Remove any obstacle between the
Sound Bar and the BLUETOOTH
device or move the Sound Bar away
from the obstacle.
Reposition the connected
BLUETOOTH device.
Switch the wireless LAN frequency of
any nearby wireless LAN router or PC
to 5 GHz range.
Increase the volume on the
connected BLUETOOTH device.
The remote control of the Sound Bar
does not function.
Point the remote control at the
remote control sensor on the Sound
Bar (page 8).
Remove any obstacles in the path
between the remote control and the
Sound Bar.
Replace both batteries in the remote
control with new ones, if they are
weak.
Make sure you are pressing the
correct button on the remote control.
TV remote control does not work.
This problem might be solved by
enabling the IR repeater function
(page 20).
The Control for HDMI function does
not work properly.
Check the connection with the Sound
Bar (refer to the supplied Startup
Guide).
Enable the Control for HDMI function
on the TV. For details, refer to the
operating instructions of your TV.
Wait a while, and then try again. If
you unplug the Sound Bar, it will take
a while before operations can be
made. Wait for 15 seconds or longer,
and then try again.
Make sure the devices connected to
the Sound Bar support the Control for
HDMI function.
Enable the Control for HDMI function
on the devices connected to the
Sound Bar. For details, refer to the
operating instructions of your device.
The type and number of devices that
can be controlled by the Control for
HDMI function is restricted by the
HDMI CEC standard as follows:
– Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up to
3 devices
– Playback devices (Blu-ray Disc
player, DVD player, etc.): up to 3
devices
– Tuner-related devices: up to 4
devices
– Audio system (receiver/
headphones): up to 1 device (used
by the Sound Bar)
All the indicators flash quickly and
the Sound Bar is turned off.
Disconnect the AC power cord (mains
lead) and make sure nothing is
Remote Control
Others
Содержание HT-X8500
Страница 99: ......
