Sony HT-SD35, Руководство по эксплуатации

Страница: 30 / 80

30
US
electromagnetic radiation is nearby,
move the device away from the
Sound Bar.

Pairing may not be possible if other
BLUETOOTH devices are present
around the Sound Bar. In this case,
turn off the other BLUETOOTH
devices.
Sound of the connected
BLUETOOTH mobile device is not
output from the Sound Bar.

Make sure that the BLUETOOTH
indicator on the Bar Speaker is lit
(page 8).

Bring the BLUETOOTH device close to
the Bar Speaker.

If a device that generates
electromagnetic radiation, such as a
wireless LAN device, other
BLUETOOTH devices, or a microwave
oven is nearby, move the device away
from the Sound Bar.

Remove any obstacle between the
Bar Speaker and the BLUETOOTH
device or move the Bar Speaker away
from the obstacle.

If the Bar Speaker is installed under
the TV, move the Bar Speaker away
from the TV.

Reposition the connected
BLUETOOTH device.

Switch the wireless LAN frequency of
any nearby wireless LAN router or PC
to 5 GHz range.

Increase the volume on the
connected BLUETOOTH device.
The sound is not in sync with the
image.

When you are watching movies, you
may hear the sound with a slight
delay from the image.
The remote control of the Sound Bar
does not function.

Point the remote control at the
remote control sensor on the Bar
Speaker (page 8).

Remove any obstacles in the path
between the remote control and the
Sound Bar.

Replace both batteries in the remote
control with new ones, if they are
weak.

Make sure you are pressing the
correct button on the remote control
(page 13).
The TV remote control does not
work.

Install the Bar Speaker so that it does
not obstruct the remote control
sensor of the TV.

This problem might be solved by
enabling the IR repeater function
(page 16).
The Control for HDMI function does
not work properly.

Check the connection with the Sound
Bar (refer to the supplied Startup
Guide).

Enable the Control for HDMI function
on the TV. For details, refer to the
operating instructions of your TV.

Wait a while, and then try again. If
you unplug the Sound Bar, it will take
a while before operations can be
made. Wait for 15 seconds or longer,
and then try again.

Make sure the devices connected to
the Sound Bar support the Control for
HDMI function.

Enable the Control for HDMI function
of the devices connected to the
Remote Control
Others