17
US
HT-NT3
4-559-515-
12
(1)
D:\NORM'S JOB\SONY HA\SO150013\HT-NT3 (PMRF
05)\4559515121_USCaFRLaES (UC2)\US\040BLU.fm
masterpage:
Right
Ne
tw
or
k Funct
ion
Enter the values for [Subnet Mask],
[Default Gateway], [Primary DNS] and
[Secondary DNS], then press
.
Connecting with a
wireless network
Before performing network
settings
When your wireless LAN router (access
point) is Wi-Fi Protected Setup (WPS)-
compatible, you can easily set the
network settings with the WPS button.
If not, you will be required to select or
enter the following information. Check
the following information in advance.
The network name (SSID)* of the
wireless LAN router/access point
The security key (password)** for the
network
* SSID (Service Set Identifier) is a name
that identifies a particular access point.
** This information should be available
from a label on your wireless LAN
router/access point, from the operating
instructions, from the person who set up
your wireless network, or from the
information provided by your Internet
service provider.
1
Follow Steps 1 to 4 of “Setting up a
wired LAN connection” (page 16).
2
Press
/
to select [Wireless
Setup(built-in)], then press
.
A list of available SSIDs (access
points) appears on the TV screen.
3
Press
/
to select the network
name (SSID) you want, then press
.
The security setting display appears
on the TV screen.
4
Enter the security key (WEP key,
WPA/WPA2 key) using the
software keyboard. Use
/
/
/
and
to select the characters/
numbers, then select [Enter] to
confirm the security key.
The system starts connecting to the
network. For details, refer to the
messages that appear on the TV
screen.
If using a fixed IP address
Select [New connection registration] in
step 3, select [Manual registration], then
follow the on-screen instructions to
select [Specify IP address]. The IP
address input display appears on the TV
screen.
Follow the on-screen instructions to
enter the value for [IP Address], then
press
to confirm the values.
Enter the values for [Subnet Mask],
[Default Gateway], [Primary DNS] and
[Secondary DNS], then press
.
The security setting display in step 4 does
not appear if your network has not been
secured by encryption (using the security
key).
Setting up a wireless LAN
connection
Note
