83
9-4 Items in the Extended Setup Menu
Chapt
er 9 Set
u
p
Men
u
s
119
VARIABLE SPEED LIMIT
IN KEY PANEL CONTROL
Select the playback speed range in variable speed playback with the control panel
of this unit.
OFF:
–1 to +2 times normal speed
ON:
0 to 1 times normal speed
120
CTL LOCK IN VAR/SHTL
Select whether the tape transport should be phase-locked to the CTL signal during
playback in variable speed or shuttle mode.
OFF:
Not phase-locked.
ON:
Phase-locked at the following speeds: –1, –0.5, 0.5, 1.0 and 2.0 times normal
speed.
121
DT MODE
Select field or frame mode for variable speed playback.
FIELD:
Always field playback
FRAME:
Frame playback in the noiseless playback speed range; otherwise field
playback. Frame playback provides higher-density in still pictures than field
playback.
Note
For HDCAM tapes recorded in PsF mode, playback is automatically carried out in
frame mode.
125
AUTO REWIND
Select whether or not to rewind the tape automatically when recording or playback
reaches the end of a tape.
DIS:
Not rewind
ENA:
Rewind
130
DISPLAY DIMMER
CONTROL
Set the brightness of LCD.
0 to 7:
Set in this range. 0 is the brightest, and 7 the dimmest.
139
LOST LOCK DISPLAY ON
CONTROL PANEL
Select whether to display the message “LOST LOCK” on the control panel when
the lock is lost.
OFF:
No display
ON:
Display
Menu items in the range 200 to 299, relating to the remote control interface
Item number
Item name
Settings
201
PARA RUN
Select whether to make syncronous operation for two or more VTRs.
DIS:
No synchronized operation
ENA:
Make syncronous operation
Note
To make syncronous operation for two or more VTRs, set item 201 to “ENA” on all
VTRs.
202
CF FLAG REPLY (In 50i,
24PsF or 25PsF mode
only)
Select the mode for locking to the color framing sent from the remote controller.
8F:
Eight-field locking mode
4F/8F:
Four- or eight-field locking mode
Menu items in the range 100 to 199, relating to the control panels (Continued)
Item number
Item name
Settings
