42
4-2 Playback
C
h
ap
te
r 4
R
e
c
o
rd
in
g
an
d
P
la
y
ba
c
k
To start playback at the on-air cue from the on-air
start point
Use the following procedure.
1
Holding down the SHIFT/ENTRY button, select F3
(REVIEW) in function menu page P06: EDIT.
F3 (REVIEW) lights, and the tape is cued up to the on-
air start point. After the tape is cued up, F3 (REVIEW)
flashes.
2
At the moment of the on-air cue, hold down the
SHIFT/ENTRY button and select F3 (REVIEW)
again.
F3 (REVIEW) lights, and playback starts at normal
speed.
Between the speed variation start and end points,
DMC playback is carried out at the stored speed, and
then playback continues at normal speed and the tape
stops at the on-air end point.
To start playback immediately after preroll
Holding down the SHIFT/ENTRY button, select F2
(PREVIEW) in function menu page P06: EDIT.
F2 (PREVIEW) is lit, and after preroll, DMC playback is
carried out at the stored speed from the speed variation
start point, then playback continues at normal speed from
the speed variation end point.
To stop the tape during DMC playback
Press the STOP button.
To exit DMC playback mode
Press the F4 (DMC) button and the ALT/DELETE button
simultaneously.
