Sony HDVF-L750, Руководство по обслуживанию

Страница: 50 / 72

Page Menu Item setting
( [ ] is a factory set-
ting value.) Function
S01 FUNCTION2 MAG REL TIME 1 to [5] to 10 Sets the time required until returning
from the expanded display to the ordi-
nary display when MAGNIFICATION
AUTO RELEASE is set to AUTO.
*1
VF ASSIGN SW [FRONT] , LEFT ,
RIGHT Switches combination of switches that
are settable for the camera ASSIGNA-
BLE switch.
*2
FRONT: ASSIGN. 1/2 of the front side
is assigned.
LEFT: ASSIGN SW L1/L2 of the left
handle is assigned.
RIGHT: ASSIGN SW R1/R2 of the
right handle is assigned.
SECRET IND [OFF] , ON Enables or disables the secret indicator.
OFF: Disabled
ON: Enabled
S02 TEST TEST1 [OFF] , BARS , SAW ,
RASTER , WINDOW Sets the internal test signal on the input
side before scaling.
*3
OFF: Outputs no test signal.
BARS: Outputs a color bars signal.
SAW: Outputs the test signal of a saw-
tooth waveform.
RASTER: Outputs a rectangular test
signal.
WINDOW: Outputs a window test sig-
nal.
COLOR SELECT [W] , R , G , B , YL , CY ,
MG Sets the display color during selection
of test signal (RASTER rectangular or
WINDOW) in TEST1.
TEST LEVEL 0 % to [100 %] to 109 % ,
MAX Sets the signal level during selection of
test signal (RASTER rectangular or
WINDOW) in TEST1.
TEST2 [OFF] , BARS , SAW ,
RASTER , WINDOW Sets the internal test signal after scal-
ing.
*3
OFF: Outputs no test signal.
BARS: Outputs a color bars signal.
SAW: Outputs the test signal of a saw-
tooth waveform.
RASTER: Outputs a rectangular test
signal.
WINDOW: Outputs a window test sig-
nal.
COLOR SELECT [W] , R , G , B , YL , CY ,
MG Sets the display color during selection
of test signal (RASTER rectangular or
WINDOW) in TEST2.
TEST LEVEL 0 % to [100 %] to 109 % ,
MAX Sets the signal level during selection of
test signal (RASTER rectangular or
WINDOW) in TEST2.
S03 C.TEMP/BACK-
LIGHT GAIN R 0 to [xx] to 255 Adjusts the color balance (gain R).
GAIN G 0 to [xx] to 255 Adjusts the color balance (gain G).
GAIN B 0 to [xx] to 255 Adjusts the color balance (gain B).
DIMMER 0 to [xx] to 255 Adjusts the luminance level.
Continued
*1: Refer to AUTO RELEASE of OPERATION MENU 03 MAGNIFICATION.
*2: Check whether the camera to be connected supports VF ASSIGNABLE SW.
*3: Necessarily operates in the OFF state when the power is turned on.
HDVF-L750/HDVF-L770
4-4