Section 5
Electrical Adjustment
5-1.
Actions to Be Taken When Replacing the LCD Module
Tip
An adjustment data label is stuck to a new LCD module. Information required for settings is written on the adjustment
data label.
Procedure
1.
Replace the LCD module. (Refer to
2.
Connect the unit to the camera and turn on the power of the unit. Check that a video image is displayed on the
LCD.
3.
Display the SERVICE menu. (Refer to
)
4.
Enter the set values written on the adjustment data label in all items of the “S03: C. TEMP/BACKLIGHT”
menu.
5.
Check that the set values entered in step 4 is the same as the set values written on the adjustment data label.
6.
Turn off and on the power and check that a video image is displayed.
HDVF-L750/HDVF-L770
5-1
