57
4-22. VIF-77 Board
Preparation
1. Remove the outside assembly. (Refer to "4-4. Outside Assembly")
2. Remove the inside assembly. (Refer to "4-5. Inside Assembly")
3. Remove the front panel block. (Refer to "4-7. Front Panel Block")
4. Remove the rear panel assembly. (Refer to "4-18. Rear Panel Assembly")
Procedure
1. Disconnect the harness from the connector (CN201) on the MB-1259 board.
2. Remove the four screws.
3. Remove the sub chassis assembly from the B to B connector in the direction of the arrow.
Sub chassis assembly
B-to-B connector
PSW
3 x 8
B-to-B connector
Harness
MB-1259 board
VIF-77 board
CN201