49
Preparations
2
In the same manner as step
1
, remove the viewfinder
shoe of the camera from the front-rear positioning
mechanism.
3
Using the two bolts (M4
×
8) and the washers removed
from the camera in step
2
, attach the rotation
mechanism assembly of the BKW-401 to the camera.
Attaching the Cable Clamp Band
(Supplied)
You can secure the optical composite cable to the camera
by attaching the supplied cable clamp band.
1
Remove two
3
B3
×
5 screws and a blind screw shown
in the figure below:
2
Attach the cable clamper and clamp band to the
camera using the supplied
3
B3
×
10 screws.
Adjusting the Shoulder Pad Position
You can shift the shoulder pad from its center position
(factory setting) backward by up to 10 mm (3/8 inch) or
forward by up to 25 mm (1 inch). This adjustment helps
you get the best balance for shooting with the camcorder
on your shoulder.
Hexagon
socket bolts
(M4
×
8)
Blind screw
3
B3
×
5 screws
Cable clamper
3
B3
×
10 screws
Cable clamp band
Optical
composite cable
