40
Locations and Functions of Parts
Pressing the right button selects the available CC filters
(cross, 3200K, 4300K, 6300K, 8000K) in sequence.
e
FILTER LOCAL button
While holding this button depressed, press either of the
filter select buttons to select the ND or CC filters.
f
AUTO W/B BAL (white and black balance
automatic adjustment) switch
This switch does not function.
Use a camera control unit or a remote control device, such
as MSU or RCP series.
g
GAIN switch
This switch does not function.
Use a camera control unit or a remote control device, such
as MSU or RCP series.
h
OUTPUT (output signal selection)/AUTO KNEE
switch
Select the signal (color bar signal or camera’s video signal)
to be used as output to the viewfinder or the TEST OUT
connector when the camera control unit is not connected
and only the camera is on.
BARS:
Output is a color bar signal.
CAM:
Output is the camera’s video signal.
AUTO KNEE:
Not used
When a camera control unit is connected, output singal
selection is controlled from the external control device,
and this switch of the camera is disabled.
i
WHITE BAL (white balance memory selection)
switch
This switch does not function.
Use a camera control unit or a remote control device, such
as MSU or RCP series.
j
DISPLAY switch
The functions of the DISPLAY switch are as follows:
DISPLAY:
Characters and messages showing the camera
settings and operating status may be displayed on the
viewfinder screen.
OFF:
Status messages will not appear on the viewfinder
screen.
MENU:
Menus for camera settings will be displayed on
the viewfinder screen.
k
CANCEL/STATUS switch
When a menu is displayed on the viewfinder screen, you
can cancel any changed settings or return the display to the
previous menu.
When no menu is displayed on the viewfinder screen, the
status information of this camera is displayed.
l
Memory Stick section
A slot to accommodate a “Memory Stick” and an access
lamp are provided behind the panel. The access lamp lights
in red while writing or reading data to/from a “Memory
Stick.”
When the access lamp is lit, do not insert/remove the
“Memory Stick” or turn off the camera.
m
MENU SEL (menu select) knob/ENTER button
(rotary encoder)
Used to select settings from menus displayed on the
viewfinder screen (by rotating the knob) and to confirm
settings (by pushing the button).
Note
Note
