45
Locations and Functions of Parts
Connector panel
a
EARPHONE jack (stereo minijack)
Connect an earphone or headset for output of the intercom.
b
RET CTRL (return control) connector (6-pin)
Used for connection to a CAC-6 Return Video Selector.
c
CRANE connector (12-pin)
For external interface, such as viewfinder (and external
data with HDC1500).
d
TRACKER connector (10-pin)
For external interface, such as intercom and tally.
e
DC OUT (DC power supply output) connector (4-
pin)
Used to supply power to devices such as a wireless receiver
(optional).
f
DC IN (DC power supply input) connector (XLR 4-
pin)
Used for connection to the AC-DN10 AC Adaptor to
supply power to the camera.
g
INTERCOM 1 and 2 connectors (XLR 5-pin)
Used for input and output of intercom audio signals.
h
REMOTE connector (8-pin)
Used for connection to an RM-B150/B750 Remote
Control Unit, RCP-700/900-series Remote Control Panel,
or MSU-900/950 Master Setup Unit.
When the camera is connected to a CCU, do not connect
any device to this connector.
i
PROMPTER 1 connector (BNC type)
Used for output of a prompter signal.
j
TEST OUT connector (BNC type)
Used to output the analog signal.
This also supplies the VBS signal, an HD signal nearly
equal to the signal output from the VF connector, an HD-
SYNC signal, or an SD-SYNC signal depending on which
of these you have selected on the menu.
k
SDI 2 (serial digital interface) connector (BNC type)
Used for HD SDI or SD SDI signal output.
INTERCOM 1
OFF
+48V
MIC
FRONT MIC
DC OUT
AUDIO IN
CH 1
CH 2
TEST
OUT
SDI 2
DC IN 10.5-17V
RET IN
GENLOCK IN
LINE
OFF
+48V
MIC
AES/EBU
LINE
INTERCOM 2
EARPHONE
REMOTE
RET CTRL
CRANE
TRACKER
PROMPTER1
g
INTERCOM 1 and 2 connectors
a
EARPHONE jack
d
TRACKER connector
c
CRANE connector
i
PROMPTER 1 connector
l
AUDIO IN CH1 and CH2 connectors and switches
b
RET CTRL connector
h
REMOTE connector
j
TEST OUT connector
e
DC OUT connector
f
DC IN connector
k
SDI 2 connector
Note
