Sony HCD-DJ2i - Usb And Ipod Section, Руководство по обслуживанию

Страница: 22 / 88

HCD-DJ2i
22
TUNER STEP CHANGE
• The step interval of AM channels can be toggled between 9
kHz and 10 kHz. This mode is not available for Saudi Arabia
model.
• Procedure:
1. Press [
?/1
] button to turn the set ON.
2. Press [TUNER/BAND] button to select the “AM”.
3. Press
[
?/1
] button to turn the set OFF.
4. Press [ENTER] on CHANNEL B button and [
?/1
]
button simultaneously. The system will turn ON
automatically. The message “AM 9K STEP” or “AM 10K
STEP” appears on the fl uorescent indicator tube and thus
the channel step is changed.
CD SERVICE MODE
• This mode let you move the CD sled motor freely. Use this
mode when you want to clean the optical pick-up.
• Procedure:
1. Press [
?/1
] button to turn the set ON.
2. Select CD function.
3. Press [CD] button, [
L
] on CHANNEL A button, and
[BEAT PATTERN] button simultaneously.
4. The CD service mode is activated. The message
“SERVICE MODE” appears on the fl uorescent indicator
tube.
5. With the CD in stop status, press [ +] button to move
the optical pick-up to outside track, or press [ –] button
to move to inside track. The message “SLED OUT” or
“SLED IN” appears on the fl uorescent indicator tube.
6. To turn on or off the laser, press [
L
TUNE +] on
CHANNEL B button. The message “LD ON” or “LD
OFF” appears on the fl uorescent indicator tube.
7. To release from this mode, press [
?/1
] button.
CD AGING MODE
• This mode can be used for operation check of CD section.
If an error occurs, the aging operation would stops and the
status is displayed.
If there were no error occurs, the aging operation would
continue repeatedly.
• Procedure:
1. Press [
?/1
] button to turn the set ON.
2. Select CD function.
3. Load a disc on the disc tray.
4. Press [PLAY MODE/TUNING MODE] button on the
remote commander repeatedly to select the Normal Play
mode, and press the [REPEAT/FM MODE] button on the
remote commander repeatedly to select repeat mode off.
5. Press [CD] button, [BEAT PATTERN] button and
[
i
SELECT] button simultaneously.
6. Aging operation is started.
7. To release from this mode, press [
?/1
] button or
disconnect the power cord to turn the power OFF.
• Aging mode sequence:
START
Disc Chucking
TOC Reading
Play first track for
2 seconds
Play last track for
2 seconds
Open the disc tray
Close the disc tray