55
DCR-HC23E/HC24E/HC26E/HC35E
2-659-812-
11
(1)
Du
bbi
ng
/E
d
iti
n
g
E:\SONY\2659812111\01GB05BAS_E.fm
5
When recording pictures from a
VCR/DVD device:
Start playing the cassette or the
disc on the VCR/DVD device.
When recording pictures from a
TV:
Select a TV program.
The picture played on the connected
device appears on the LCD screen of
your camcorder.
6
Touch [REC START] at the point
you want to start recording.
7
Stop recording.
Touch
(Stop) or [REC PAUSE].
8
Touch [
RET.]
t
.
Dubbing sound to a
recorded tape
You can add sound to a tape already
recorded in the 12-bit mode (p. 48) without
erasing the original sound.
You can record audio by using the internal
stereo microphone.
• You cannot record additional audio:
– When the tape has been recorded in the 16-bit
mode (p. 48).
– When the tape has been recorded in the LP
mode.
– When your camcorder is connected via an
i.LINK cable.
– When the tape has been recorded in 4CH MIC
mode.
– On blank sections of the tape.
– When the tape has been recorded in a TV
color system other than that of your
camcorder (p. 83).
– When the write-protect tab of the cassette is
set to SAVE (p. 83).
– On sections recorded in HDV format.
• When you add sound, the picture will not be
output from the A/V OUT jack. Check the
picture on the LCD screen or the viewfinder.
• For DCR-HC35E:
Do not insert/eject the cassette while your
camcorder is on the Handycam Station. This
may cause a malfunction.
Internal stereo
microphone
Continued
,
