Sony GV-D300 Operating Instructions (primary manual), Руководство по обслуживанию

Страница: 93 / 148

5-29
3-6. IR TRANSMITTER ADJUSTMENTS
Adjust using a IR receiver jig (J-6082-383-A).
Switch setting:
LASER LINK ................................................ ON (Red LED is lit)
1. IR Video Carrier Frequency Adjustment
(CB-61 board)
Mode VTR stop
Signal Arbitrary
Measurement Point Pin
5
of CN003 of IR receiver jig
(RF) (Or Pin
!§
of IC8401)
Measuring Instrument Frequency counter
Adjustment Page D
Adjustment Address 90
Specified Value f = 11.85 ± 0.05 MHz
Connection of Equipment
Connect the measuring device as shown in the following figure,
and adjust.
Fig. 5-3-20
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: 2, address: 12, set data: 10, and press the PAUSE
button of the adjustment remote commander.
3) Select page: D, address: 90, change the data, and set the video
carrier frequency (f) to the specified value.
4) Press the PAUSE button of the adjustment remote commander.
5) Select page: 2, address: 12, set data: 00, and press the PAUSE
button of the adjustment remote commander.
6) Select page: 0, address: 01, and set data: 00.
2. IR Video Deviation Adjustment (CB-61 board)
Mode Playback
Signal Alignment tape:
For audio operation check
(XH5-3 (NTSC))
(XH5-3P (PAL))
Measurement Point VIDEO OUT terminal of IR receiver
jig (Terminated at 75
Ω
)
Measuring Instrument Oscilloscope
Adjustment Page D
Adjustment Address 91
Specified Value A = 1.00 ± 0.05 V
Connection of Equipment:
Connect the measuring device as shown in the following figure,
and adjust.
Fig. 5-3-21
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 91, and change the data, set the video
signal amplitude (A) to the specified value.
3) Press the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
For NTSC model
For PAL model
Fig. 5-3-22
Main unit
IR receiver jig
CN003
pin
5
Frequency counter
Main unit IR receiver jig
VIDEO
OUT
75
Ω
75
Ω
(1-247-804-11)
Oscilloscope
White (100%)
A
H
White (100%)
A
H