Sony Giga Juke NAS-S55HDE, Руководство по эксплуатации

Страница: 79 / 135

NAS-S55HDE.GB.3-277-228- 11 (1)
GB
Connecting and setting up
a wired network (Automatic
setting)
This section explains the setup for a wired
network.
When you turn on the unit for the
first time
If your unit is newly purchased and you connect
it to the device (broadband router, hub, etc.) that
has been connected and set up for your computer,
the unit will automatically set up the wired
network when you turn it on for the first time.
If the unit fails to connect to the network, do the
following procedure.
1
Connect the unit to the device (broadband
router, hub, etc.) that is connected to your
computer.
Broadband router
Computer Rear of the unit
Network cable
To the NETWORK port
2
Enter the Settings menu and select
[Network setting].
3
Select [Auto setting].
Follow the instructions that appear on the
display.
When the unit connects to the network, a
pop-up window will appear, indicating that
the connection has been completed, followed
by the network setting display.
Note
If the unit does not connect to the network, check the
connection between the devices.
To setup the network manually
(Manual setting)
If you cannot make a network connection
with the automatic setting or if you want to
connect the unit to the network through a wired
connection after having connected through
a wireless connection, you need to set up the
network manually.
Additional settings may be required, depending
on the specifications of the Internet provider or
the way the router is being used.
1
Enter the Settings menu and select
[Network setting].
2
Select [Manual setting].
Note
If you select [Manual setting] after the unit has
been connected to the network using an automatic
setting, the connection stops. To reconnect to the
network with the automatic setting, select [Auto
setting].
3
Select [LAN] – [Wired].
4
Select [Wired LAN setting].
“Checking Network setting” appears in the
display, and then the setup display appears.

: This item does not need to be set.

:This item must be set. In this case, go to step 5.