Sony FWD-S42E1, Руководство по эксплуатации

Страница: 61 / 256

19
GB
FWD-S42E1
4-160-338- 01 (1)
GB
Before you start
• First make sure that the power of each piece of equipment
is turned off.
• Use cables suitable for the equipment to be connected.
• Connect the cables, fully inserting them into the
connectors or jacks. A loose connection may cause hum
and other noise.
• To disconnect the cable, pull it out by grasping the plug.
Never pull the cable itself.
• See the instruction manual of the equipment to be
connected, too.
• Insert the plug securely into the AC IN socket.
• Use one of the two AC plug holders (supplied) to securely
hold the AC plug.
Connecting the
Speakers
Connect the speakers SS-SPG02 (not supplied).
To connect, use the following speaker cords included
with the speakers.
Please be sure to connect the speakers correctly. For
more details on connecting the speakers, see the
operating manual of the speakers. For details on how
to route the speaker cords, see page 20.
Connecting the AC
Power Cord
1
Plug the AC power cord into the AC IN
socket. Then, attach the AC plug holder
(supplied) to the AC power cord.
2
Slide the AC plug holder over the cord until
it connects to the AC IN socket cover.
To remove the AC power cord
After squeezing the AC plug holder and freeing it,
grasp the plug and pull out the AC power cord.
Connections
Speaker cord (without terminal cover)
AC IN socket
AC power cord
AC plug holder
AC IN socket cover
010COV.book Page 19 Monday, October 12, 2009 4:42 PM