manualshive.com logo in svg

Sony FH300L - VPL - LCD Projector, Руководство по эксплуатации, Страница: 52 / 68

Поделиться
Скачать
Sony FH300L - VPL - LCD Projector Скачать руководство пользователя страница 52

52

Troubleshooting

Others

Indicators

Symptom

Cause and Remedy

The fan is noisy.

c

Check the setting of “High Altitude Mode” in the Setup menu 
(see page 38).

c

Check the ventilation holes are not blocked.

c

Make sure the room temperature is not too high.
To maintain the product reliability of the projector’s components, 
the rotation speed of the fan increases and the fan becomes 
slightly noisier, when the room temperature exceeds normal. The 
approximate normal temperature is 25°C. 

Symptom

Cause and Remedy

The LAMP/COVER 
indicator flashes in orange. 
(Repetition rate of 2 
flashes)

• The lamp cover or the air filter cover is detached.

c

Attach the cover securely (see page 47).

The LAMP/COVER 
indicator flashes in orange. 
(Repetition rate of 3 
flashes)

• The lamp has reached the end of its life.

c

Replace the lamp (see page 46).

• The lamp has reached a high temperature.

c

Wait for 60 seconds to cool the lamp and then turn on the power 
again.

The LAMP/COVER 
indicator flashes in orange. 
(Repetition rate of 4 
flashes)

The shutter fails to operate properly.

c

Consult with qualified Sony personnel.

ON/STANDBY flashes in 
red. (Repetition rate of 2 
flashes)

• The internal temperature is unusually high.

c

Check to see that nothing is blocking the ventilation holes.

• The projector is being used at a high altitude.

c

Ensure that “High Altitude Mode” in the Setup menu is set to 
“On.”

ON/STANDBY flashes in 
red. (Repetition rate of 4 
flashes)

The fan is broken.

c

Consult with qualified Sony personnel.

ON/STANDBY flashes in 
red. (Repetition rate of 6 
flashes)

Unplug the AC power cord from the wall outlet after the ON/
STANDBY indicator goes out, plug the power cord to the wall 
outlet, and then turn the projector on again. If the ON/STANDBY 
flashes in red and the problem persists, the electrical system has 
failed.

c

Consult with qualified Sony personnel.

LAMP indicator 1 (2) 
lights in orange.

• The lamp must be replaced.

c

Replace the specified lamp (Lamp 1 or 2) (see page 46). 

* The lamp that needs to be replaced lights.

• The lamp temperature has been high. 

c

Wait for more than 60 seconds so that the lamp  cools, and then 
turn on the power again.

* The lamp that has fails to light is shown.

The PIC MUTING 
indicator lights in orange.

The projector is in muting mode.

c

To cancel it, press the MUTING (PIC) key on the Remote 
commander.

Содержание FH300L - VPL - LCD Projector





































































Отзывы:

Нет отзывов