27
Turning Off the Power
Pr
oj
ec
tin
g
t
h
e
P
ict
ur
e
The VPLL-4008 does not have the zoom
function. To adjust the focus of the picture,
turn the lens ring.
To adjust the tilt of the installation
surface
If the projector is installed on an uneven
surface, use the adjusters to keep the
projector level.
• Be careful not to let the projector down on
your fingers.
• Do not push hard on the top of the projector
with the adjuster extended.
It may cause a malfunction.
Turning Off the
Power
1
Press the
?
/
1
key.
“POWER OFF? Please press
?
/
1
key
again.” appears to confirm that you want
to turn off the power.
The message disappears if you press any
key other than the
?
/
1
key, or if you do not
press any key for about five seconds.
2
Press the
?
/
1
key again.
The ON/STANDBY indicator flashes in
green and the fan continues to run to
reduce the internal heat. Also, the ON/
STANDBY indicator flashes quickly.
During this time, you will not be able to
light up the ON/STANDBY indicator
again with the
?
/
1
key.
3
Unplug the AC power cord from the
wall outlet after the fan stops running
and the ON/STANDBY indicator
lights in red. (except when using the
Direct Power On/Off function.)
When you cannot confirm the on-
screen message
When you cannot confirm the on-screen
message under certain conditions, you can
turn off the power by holding the
?
/
1
key for
about one second instead of the steps
1
and
2
above.
The internal circuitry of the Direct Power On/
Off functions may cause the fan to continue to
operate for a short time even after the
?
/
1
key
is pressed to turn off the power and the ON/
STANDBY indicator changes to red.
Note
Notes
Turn to adjust
Note
Note