42
The Installation Menu
The Installation Menu
The Installation menu is used for changing the settings of the projector.
Lamp Mode
Standard
All
ID Mode
Illumination
Direct Power On
Auto HV
Two Lamps
Lamp Light Mode
High
Setting items
Functions
Initial setting
V Keystone
Corrects the vertical trapezoidal distortion of the picture.
When the bottom of the trapezoid is longer than the top
(
):
Sets a lower value (– direction)
When the top of the trapezoid is longer than the bottom
(
):
Sets a higher value (+ direction).
0
Image Flip
Flips the picture on the screen horizontally and/or
vertically.
Use this item for installation for the backside projection or
ceiling installation.
•
HV:
Flips the picture horizontally and vertically.
•
H:
Flips the picture horizontally.
•
V:
Flips the picture vertically.
•
Off:
The picture does not flip.
•
Auto HV:
Flips the picture horizontally and vertically
automatically to suit the installation conditions of the
projector
Auto HV
Lamp Light
Mode
Sets the lighting mode of the two equipped lamps.
•
Two Lamps:
Always lights 2 lamps.
•
Auto one Lamp:
Lights the lamp whose timer is set to
use for a shorter period of time than the other.
•
Fixed Lamp 1:
Always lights lamp 1.
•
Fixed Lamp 2:
Always lights lamp 2.
Two Lamps
Lamp Mode
Sets the lamp brightness used during the projection.
•
High:
Illuminates the projected image brightly.
•
Standard:
Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the “High” setting.
Standard
Lens Control
Locks to avoid any operation of the lens such as “Focus,”
“Zoom,” and “Shift,” by mistake.
When set to “On,” you can adjust the projection lens
using “Focus,” “Zoom,” and “Shift.” After you make this
adjustment, it is recommended that you set this item to
“Off” to avoid any operation of the lens. When set to
“Off,” the FOCUS, ZOOM and SHIFT keys do not work.
On