0
Basic Functions
FCB-EH6500(GB) A-EEP-100-11(1)
Enlargement Commands
Enlargement commands support the following
functions (described previously).
Turn on this mode (for details, see “Enlargement
Mode” in “Register Setting” on page 52) to enable the
following functions.
• Exposure Compensation
The setting can be set in steps of 0.2dB approximately
(-128 (00h) to +127 (FFh)).
For details, see page 10.
• Aperture Control
The setting can be set to 256 levels (00h to FFh).
For details, see page 10.
• Custom Color Gain
The initial setting is 100% (80h), and the setting can
be set to 256 levels from approximately 0% (00h) to
200% (FFh).
For details, see page 12.
• Custom Color Phase
The initial setting is 0 degrees (80h), and the setting
can be set to 256 levels from approximately −14
degrees (00h) to +14 degrees (FFh).
For details, see page 12.
• Auto ICR Mode
The setting of ICR ON→OFF threshold can be set
when Auto ICR is on.
The setting range is 0dB (00h) to 43dB (1Ch).
The setting of ICR OFF→ON threshold (On Level)
can be set when Auto ICR is on.
The setting range is 0dB (00h) to 43dB (1Ch).
For details, see page 12.
Note
When the enlargement mode is Off, CMD_NOT_
EXEC will be returned if you send the enlargement
commands to the camera.
When the enlargement mode is On, CMD_NOT_
EXEC will be returned if you send the normal
commands to the camera.