1
Basic Functions
FCB-EH6300(GB) A-E23-100-13(1)
ICR
SHUTTER
Dark
Bright
AGC
MAX
IRIS
OPEN
Shutter 1/60 sec
ICR OFF
U
ON
GAIN
ICR ON
IRIS
When Auto Slow Shutter is ON
When Auto Slow Shutter is OFF (initial setting)
Note
Depending on the information such as brightness, etc., in the ON/
OFF settings condition, a malfunction may occur when the subjects
largely consisting of blue and green colors are taken.
Camera ID
The ID can be set up to 65,536 (0000 to FFFF). As this
will be memorized in the nonvolatile memory inside,
data will be saved.
Picture Effect
It consists of the following functions.
•
Neg. Art:
Negative/Positive Reversal
•
Black & White:
Monochrome Image
Others
E-FLIP
This function reverses the video output from the
camera vertically and horizontally.
Mirror Image
This function reverses the video output from the
camera horizontally.
Freeze
This function captures an image in the field memory of
the camera so that this image can be output
continuously.
Because communication inside the camera is based on V cycle,
the captured image is always the one 3V to 4Vs after the
sending of a Command. Thus, you can not specify a time
period after sending EVEN, ODD or a Command.
Memory (Position preset)
Using the position preset function, 16 sets of camera
shooting conditions can be stored and recalled.
This function allows you to achieve the desired status
instantly, even without adjusting the following items
each time.
•
Zoom Position
•
Digital Zoom On/Off
•
Focus Auto/Manual
•
Focus Position
•
AE Mode
•
Shutter control parameters
•
Bright Control
•
Iris control parameters
•
Gain control parameters
•
Exposure Compensation On/Off
•
Exposure Level
•
Backlight Compensation On/Off
•
Auto Slow Shutter On/Off
•
White Balance Mode
•
R/B Gain
•
Aperture
•
ICR On/Off
•
WD On/Off
•
WD Parameter
•
Defog On/Off
Custom Preset
As with the position preset function, the camera
shooting conditions can be stored and recalled. The
settings are recalled when the power is turned on.
For setting items, see the “Initial Settings, Custom Preset
and Backup” section on page 22.
User Memory Area
A user area of 16 bytes allows you to write data, such as
an ID for each customer, data for each system, and so
on, freely.
Note
Rewriting of memory is not unlimited. Be careful to avoid using the
memory area for such as unnecessary tasks as rewriting the
contents of the memory for every operation.
Register Setting
The camera’s default settings can be changed by the
register setting command.
Register Setting Command:
