Sony DWZB70HL, Руководство по эксплуатации

Страница: 15 / 29

Receiver Settings
15
Attaching the headband and the cord clip
Receiver Settings
Use the rotary encoder and the ESC button to configure
settings on the ZRX-HR70 half-rack receiver. Perform
setting operations as follows.
Confirm: Press the rotary encoder.
Move cursor: Turn the rotary encoder.
Cancel: Press the ESC button.
Displaying the settings menu
Press the rotary encoder to display the [Setup] screen in
the display.
To return to the main screen from the [Setup] screen,
press the ESC button.
Configuring the receiving channel
settings
Two RF modes (channel modes), wide band and narrow
band, are available on the DWZ.
Each RF mode consists of six channels. Select the
appropriate channel according to your intended use.
When using multiple channels (up to six), the two RF
modes, wide band and narrow band, cannot be used
simultaneously. Select only one RF mode during use.
To select the RF mode
1
In the [Setup] screen, select [Advanced Settings].
2
Select [RF Mode Settings].
The [RF Mode Settings] screen appears.
3
Select [Wide Band] or [Narrow Band].
When the configuration is complete, the main screen
appears again.
To select the channel
1
In the [Setup] screen, select [Channel Setup].
The [Channel Setup] screen appears.
To wear the microphone more securely, attach the
supplied headband (
1
) before wearing the
microphone.
The headband can be attached on either side.
To prevent the microphone from falling off, attach
the supplied cord clip (
2
) to the microphone cable,
then clip the microphone cable to the clothing.
RF mode Transmitting
channel number Description
Wide band
(WIDE) 1/2/3/4/5/6 This mode reduces any
interference to other
wireless equipment.
Narrow band
(NARROW) a/b/c/d/e/f This mode uses the Clear
Channel Scan function,
making it useful for
avoiding any interference
from other wireless
equipment.
Caution