Sony DVS-7200, Руководство по эксплуатации продукта

Страница: 25 / 130

SONY
DVS-7200 • Product Guide Configuration Guide
••
17
Input Configuration
This section describes the input boards that can be added to a DVS-7200 system.
•
Three slots are provided for primary input boards (select any
combination of the
BKDS-7102
and
BKDS 7110
boards). Up to
three boards can be installed, for a maximum of 36 inputs.
•
Two slots are provided for Chromakey Analog Component input
boards (
BKDS-7133 ).
In the “Request Forms” section, refer to the “DVS-7200 Input Configuration”
chart for a more detailed view of the switcher’s input configurations.
BKDS-7102 12 Input Serial Digital Board
The
BKDS-7102
12 Input Serial Digital Board provides 12 serial digital SMPTE
259M input signals. The board can be used for Composite (4fsc) or Component
(4:2:2) signals, with all configuration performed from the control panel display.
BKDS-7110 Input “Mother Board”
The
BKDS-7110
is a blank adaptor board that accepts up to 12 analog composite
or serial digital “Daughter Boards” — in any combination. The board is required if
you wish to operate with a mixture of analog composite and digital input signals.
BKDS-7111 Analog Composite “Daughter Board”
The BKDS-7111 Analog Composite Daughter Board provides one analog
composite color or monochrome input signal. The board installs onto the BKDS-
7110 (which accepts up to 12 Daughter Boards, maximum).
BKDS-7112 Serial Digital “Daughter Board”
The BKDS-7112 Serial Digital Daughter Board provides one digital composite or
digital component input signal. The board installs onto the BKDS-7110 (which
accepts up to 12 Daughter Boards, maximum).
BKDS-7133 Chroma Key Analog Component Input Board
The
BKDS-7133
Chroma Key Analog Component Input Board provides two
analog component inputs. The system accepts up to two BKDS-7133 boards, for a
maximum four analog component inputs. The inputs can be switched (via
software) between the following four formats:
•
B-CAM (0): Betacam without setup
•
B-CAM (7.5): Betacam with setup
•
SMPTE: SMPTE standard for component
•
RGB: RGB plus sync, or sync on green