1-5
22
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the
amplifier (receiver) has a digital input jack, use
. When connecting to an MD deck or a DAT
deck, use
. In this case, you can also connect the player directly to the MD deck or DAT
deck without using your stereo amplifier (receiver).
x
Recommended surround sound effects for the
connection only
•
TVS STANDARD (page 51)
z
In connection
, you can use the supplied audio/video cord instead of using a separate audio cord.
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
Note
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the
connection.
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
B
B-1
B-2
B-2
B-1
B-1
B-2
COAXIAL OPTICAL
R– AUDIO 1 – L VIDEO 1
1
2
R– AUDIO 2 – L VIDEO 2
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Y
SELECTABLE
INTERLACE
PROGRESSIVE
P
B
P
R
LINE OUT
OUT
S VIDEO
VIDEO OUT
COMPONENT
SCAN SELECT
VIDEO OUT
B-2
B-1
VIDEO 1
R– AUDIO 2 – L VIDEO 2
LINE OUT
R– AUDIO 1 – L
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
l
: Signal flow
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front
(L)
Front
(R)
[Speakers]
(white)
(red)
(white)
(red)
Coaxial digital
cord (not supplied)
Stereo audio
cord
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
to coaxial or optical digital input
to audio input
Hookups
23
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital, or
DTS decoder, refer to page 24.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
x
Recommended surround sound effects using this connection with your amplifier (receiver)
•
Dolby Surround (Pro Logic) (page 79)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
∗
When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer.
Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and
3 to 6 speakers
C
C-1
C-2
COAXIAL OPTICAL
R– AUDIO 1 – L VIDEO 1
1
2
R– AUDIO 2 – L VIDEO 2
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Y
SELECTABLE
INTERLACE
PROGRESSIVE
P
B
P
R
LINE OUT
OUT
S VIDEO
VIDEO OUT
COMPONENT
SCAN SELECT
VIDEO OUT
VIDEO 1
R– AUDIO 2 – L VIDEO 2
LINE OUT
R– AUDIO 1 – L
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
C-2
C-1
CD/DVD player
Front
(R)
Front
(L)
Rear
(R)
Subwoofer
l
: Signal flow
Dolby Surround amplifier (receiver)
center
Rear
*
(mono)
[Speakers]
or
Coaxial digital cord
(not supplied)
Stereo audio
cord
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
to coaxial or optical digital input
to audio input
(red)
(white)
Rear
(L)
[Speakers]
(white)
(red)
continued
24
This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
x
Recommended surround sound effects using this connection with your amplifier (receiver)
•
Dolby Digital (5.1ch) (page 79)
•
DTS (5.1ch) (page 79)
z
To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
Note
After you have completed the connection, be sure to set
“
DOLBY DIGITAL
”
to
“
DOLBY DIGITAL
”
(page 25).
If your AV amplifier (receiver) has a DTS decoder, set
“
DTS
”
to
“
ON
”
(page 25). Otherwise, no sound or a loud
noise will come from the speakers.
Connecting to an AV amplifier (receiver) with a digital input jack having a
Dolby Digital, or DTS decoder, and 6 speakers
D
Front
(R)
Rear
(R)
AV amplifier (receiver) with a decoder
Subwoofer
Center
[Speakers]
[Speakers]
or
l
: Signal flow
Coaxial digital cord
(not supplied)
to optical digital input
to coaxial digital
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
Front
(L)
Rear
(L)
Hookups
25
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Do not connect the power cord of your player to the
“
switched
”
power socket of an amplifier
(receiver). When you turn off the power of your amplifier (receiver), the menu setting for the
player such as Playback Memory may be lost.
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press
>
. To return to the previous adjustment, press
.
.
1
Turn on the TV.
2
Switch the input selector on the TV to the player.
3
Press POWER on the player and press
[
/
1
on the remote.
“
Press [ENTER] to run QUICK SETUP
”
appears at the bottom of the screen. If this message
does not appear, select
“
QUICK
”
under
“
SETUP
”
in the Control Menu to run Quick Setup (page
67).
4
Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears.
1
2
3
4
5
6
7
8
9
0
.
/
>
X
/
x
POWER
.
/
>
X
/
x
ENTER
ENTER
[
/
1
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
FRENCH
ENGLISH
ENGLISH
SPANISH
PORTUGUESE
continued
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299