1-4
18
Hookups
Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 15).
Notes
•
Plug cords securely to prevent unwanted noise.
•
Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns
A
through
C
, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). In order to view progressive signal (480p) pictures with a
compatible TV, projector, or monitor, you must use connection
C
.
COAXIAL OPTICAL
R– AUDIO 1 – L VIDEO 1
1
2
R– AUDIO 2 – L VIDEO 2
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Y
SELECTABLE
INTERLACE
PROGRESSIVE
P
B
P
R
LINE OUT
OUT
S VIDEO
VIDEO OUT
COMPONENT
SCAN SELECT
VIDEO OUT
P
R
P
B
Y
COMPONENT
VIDEO IN
C
AUDIO
VIDEO
INPUT
L
R
A
INPUT
S VIDEO
B
CD/DVD player
TV, projector, or AV
amplifier (receiver)
l
: Signal flow
Audio/video
cord (supplied)
(yellow)
(yellow)
Component video
cord (supplied)
S VIDEO cord
(not supplied)
TV, projector, or AV
amplifier (receiver)
TV, projector, or AV
amplifier (receiver)
(green)
(blue)
(red)
(green)
(blue)
(red)
Hookups
19
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 21).
Connect the S VIDEO cord (not supplied). You will enjoy standard quality images.
Connect the component via the COMPONENT VIDEO OUT jacks using the component video
cord (supplied) or three video cords (not supplied) of the same kind and length. You will enjoy
accurate color reproduction and high quality images. If your TV accepts progressive (480p)
format signals, you must use this connection and set
“
COMPONENT OUT
”
to
“
PROGRESSIVE
”
in
“
SCREEN SETUP
”
(page 69).
Notes
•
Do not connect the player to a VCR if you pass the player signals via the VCR. You may not receive a clear image
on the TV screen.
•
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In the case of 480 progressive scan picture problems, it is
recommended that the user switch the connection to the standard definition output. If there are questions regarding
your Sony TV set
’
s compatibility with this model 480p DVD player, please contact our customer service center.
A
If you are connecting to a video input jack
B
If you are connecting to an S VIDEO input jack
C
If you are connecting to a monitor, projector, or AV amplifier (receiver) having
component video input jacks (Y, P
B
, P
R
)
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
White (L)
Red (R)
Green
Blue
Red
Green
Blue
Red
VCR
CD/DVD player
TV
Connect directly
20
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select one of the following connections,
through
.
* Manufactured under license from Dolby Laboratories.
Pro Logic,
”
and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
**
“
DTS
”
is a registered trademark of Digital Theater Systems, Inc.
Select a connection
Connection
Components to be connected
(page 21)
•
TV (stereo)
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
AV amplifier (receiver) with a Dolby
Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
3 speakers
(front L and R, and rear (monaural))
6 speakers
(front L and R, center, rear L and R, and subwoofer)
AV amplifier (receiver) having a Dolby Digital or DTS
**
decoder and a digital
6 speakers
(front L and R, rear L and R, center, and subwoofer)
A
D
A
Hookups
21
This connection will use your TV speakers for sound.
x
Recommended surround sound effects for this connection
•
TVS DYNAMIC (page 51)
•
TVS WIDE (page 51)
The yellow plug is used for video signals (page 18).
Connecting to your TV
A
COAXIAL OPTICAL
R– AUDIO 1 – L VIDEO 1
1
2
R– AUDIO 2 – L VIDEO 2
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Y
SELECTABLE
INTERLACE
PROGRESSIVE
P
B
P
R
LINE OUT
OUT
S VIDEO
VIDEO OUT
COMPONENT
SCAN SELECT
VIDEO OUT
A
R– AUDIO 1 – L VIDEO 1
R– AUDIO 2 – L VIDEO 2
LINE OUT
TV
l
: Signal flow
CD/DVD player
Audio/video cord
(supplied)
(white)
(red)
(yellow)
to audio input
(white)
(red)
(yellow)
continued
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299