27
DVP-CX995V
[PLAY]
: Loads the disc from the chucking position of
Loading In
the table toward inside the mechanism deck.
When the Disc Load is selected, a series of
operation starting from Loading – Chucking is
performed.
[STOP]
: Moves the disc from inside the mechanism deck
Loading Out
to the table.
When the Disc Unload is selected, a series of
operation starting from Unloading – Chucking
is performed.
[OP/CL]
: Opens and closes the door.
Door Open/Close
(
Z
key)
[UP]
: Pops up the lever.
Poper Up
(
[
Q
]
key)
[DOWN]
: Pops down the lever.
Poper Down
(
[
q
]
key)
[jog FOR]
*
1
: Moves the table to the right in units of the slit.
Table R step Turn The table number is incremented in the direction
of positive (+) number.
[jog PRV]
*
1
: Moves the table to the left in units of the slit.
Table L step Turn
The table number is decremented in the
direction of negative (–) number.
[DISP]
: When this item is selected, the 400CHG Sensor
Sensor Status
Check appears on the screen.
(
[DISPLAY]
key)
*1) Turn the
[DISC/AMS]
knob on the main unit.
Display when the Sensor Status is selected in the Changer Manual
Move.
## 400CHG Sensor Check ##
Table 1/2/3/4 : X/X/X/X
Table lock : X
Load in : X
Load out : X
Door open : X
Door close : X
Poper up : X
Poper down : X
Disc Sensor : XXX
RETURN : Exit
Table 1/2/3/4
: Indicates table sensor 1/2/3/4 status.
(0: Low, 1: High)
Table lock
: Indicates each switch status.
Load in/out
(0: Off, 1: On)
Door open/close
Poper up/down
Disc Sensor
: Indicates sensitivity of the disc sensor.
The value is raging from 0 to 3FF.
2-6. Memory Check
The display image is shown below and three screens in total can be
selected.
6. Memory Check Flash Data 1
CD SL L0 L1
An.Off A xx xx xx xx
An.Off B xx xx xx xx
An.Off C xx xx xx xx
An.Off D xx xx xx xx
An.Off E xx xx xx xx
An.Off F xx xx xx xx
An.G.Main xx xx xx xx
An.G.Side xx xx xx xx
RF level xx xx xx xx
FE S level xx xx xx xx
Down:NextPage
Exit:RETURN
6. Memory Check Flash Data 2
CD SL L0 L1
TE Level xx xx xx xx
TE Offset xx xx xx xx
FCS Gain xx xx xx xx
TRK Gain xx xx xx xx
FCS Bal.1 xx xx xx xx
FCS Bal.2 xx xx xx xx
RFEQ 1 xx xx xx xx
RFEQ 2 xx xx xx xx
VTS2 xx xx xx xx
Jitter xx xx xx xx
Up/Dn:Prev/NextPage
Exit:RETURN
6. Memory Check Flash Data 3
CD SL L0 L1
VTS1 xx xx xx xx
Up:PrevPage
Exit:RETURN
2-7. Changer Manual Move
On this test mode screen, selecting
[7]
enables the machine operation
such as disc loading. The following screen appears.
Display when
[7]
is selected in the Drive Manual Operation
## Changer Manual Move ##
ENTER : Mecha Initial
PLAY : Loading In
STOP : Loading Out
OP/CL : Door Open/Close
UP : Poper Up
DOWN : Poper Down
jogFOR : Table R StepTurn
jogPRV : Table L StepTurn
DISP : Sensor Status
RETURN : Exit
[ENTER]
: Performs initialization of mechanism deck.
Mecha Initial
Because the mechanical initialization is
performed when the machine enters the Drive
Manual Operation mode, use this item when
an error such as adjustment error occurs.
