DVP-CX995V
18
3-16. DOOR SW BOARD
5
two screws
(BVTP2.6)
3
screw (PTPWH2.6)
1
screw (PTPWH2.6)
1
Move the slider (pop-up) and the lever (pu joint) fully
in the direction of the arrow
A
.
2
Install the gear (cam) in the direction shown
in the illustration and rotate it fully
in the direction of the arrow
B
.
3
When the gear (cam) happens to go too deep,
return it to the original position
in the direction of the arrow
C
.
4
gear (B)
2
gear (cam)
6
DOOR SW board
C
B
A
lever (pu joint)
two rotary switches
slider (pop-up)
gear (cam)
DOOR SW board
The levers of the two rotary switches on the DOOR SW board
are shown in the illustration below.
Precaution during the gear (cam) installation