Sony DSC-P71 - Cyber-shot Digital Still Camera, Руководство по обслуживанию

Страница: 38 / 170

1-32
DSC-P71/P71M
68
To stop the playback of the slide
show
Press the center
z
, select “EXIT” using
B
,
then press the center
z
.
To fast forward or to go back to a
previous image during a slide
show
Press the B (Forward), or the b
(Backward).
•
The interval settings are just guidelines. The
actual intervals will differ, based on factors like
the size of the image.
Rotating still images
Mode dial setting:
Images shot when holding the camera
vertically can be rotated and displayed
horizontally.
a
Turn the mode dial to , and
display the image you want to
rotate.
b
Press the MENU button.
The menu appears.
c
Select “ROTATE” using b / B ,
then press the center z .
d
Select “ ” using v / V , and
rotate the image using b / B .
e
Select “OK” using b / B , then
press the center z .
To cancel rotation
In Step
4
, select “CANCEL”, then press
the center z .
• Protected images (page 69)/movies (MPEG
MOVIE)/Clip Motion/Multi Burst images
cannot be rotated.
• Images shot on other cameras may not rotate
correctly on this camera.
• When viewing images on a personal computer,
the image viewing software used may not
handle the rotation information correctly.
69
St
ill im
a
g
e
e
d
ittin
g
Protecting images
– Protect
Mode dial setting:
To prevent accidental erasure of an
important image, you can protect it.
For single images
a
Turn the mode dial to
.
b
Display the image you want to
protect using
b / B .
c
Press the MENU button.
The menu appears.
d
Select “PROTECT” using b / B ,
then press the center z .
The image currently being displayed is
now protected, and a
- (Protect)
mark is shown on the screen.
To cancel the protection applied
to an image
In Step
4
, press the center z again. The
- (Protect) mark disappears.
For Index (9 images) screen
a
Turn the mode dial to , press
the W zoom button once, the
Index (9 image) screen
appears.
b
Press the MENU button.
The menu appears
c
Select “PROTECT” using b / B ,
and press the center z .
d
Select “SELECT” using b / B ,
and press the center z .
The frame around the selected image
turns green.
e
Select the image you want to
protect using the control
button, and press the center
z .
A - (Protect) mark will be attached
to the selected image.
Mode dial
Control button
MENU button
5
/
5
2048
SLIDE PRINT
OK
DELETE PROTECT
TO NEXT MENU
•
SET
Still image editting