Sony DSC-1024HD Скачать руководство пользователя страница 5

Страница: 5 / 71

SECTION 1

GENERAL

The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.

1-1

English

Generator lock (Gen-lock)

When you use this unit with your video editing system, the
output NTSC or PAL signal can be locked to a reference signal
(black burst video).

Aspect ratio display

The aspect ratio of the converted picture is displayed on the
screen as you zoom the picture or change the picture size.

Other features

• Three dimensional comb filter for NTSC Y/C separation
• Line correlation comb filter for PAL Y/C separation
• Up to

4 zooming

• Accepts infrared or wired Sony remote commanders using

SIRCS code

• On-screen display in five languages for user-friendly access
• Built-in test patterns for display alignment
• Three sets of video inputs with audio inputs: one composite

video or Y/C input, one composite video or RGB/
component input, and one RGB/component input

• Memory function for storage of up to five operation settings
• Automatic input signal detection with indication
• Self-adjusting for uniform output signal
• EIA rack mounting
• Selectable setup level (black reference level) for the output

NTSC signal

Rack mounting

You can mount the unit on a 19-inch EIA standard rack
using the optional MB-510 mounting bracket kit.

Attach the handle brackets with the four screws
included with this unit.

Remove the four legs from the bottom of the unit.

Mount the unit into a 19-inch standard rack.

Caution

Do not hold the handle brackets to carry the unit. If you do,
the unit may separate from the handle brackets.

Handle bracket

Screws

Front panel

OUTPUT FORMAT button

Press this button to select the desired output signal format.
The selected output signal indicator lights.

SIGNAL FORMAT indicators

IN indicators (upper)

Shows the input signal format that the unit automatically
detected.
31.5k, 37k, 48k and 64k indicate the horizontal scanning
frequencies. If the horizontal scanning frequency of the
input signal detected is one of these values ±1 kHz, the
corresponding indicator lights. If another value is
detected, the OTHERS indicator lights.

OUT indicators (lower)

Shows the output signal format selected by the OUTPUT
FORMAT button. The output signal format shown by each
indicator is as follows:

For specifications of each format, see “Preset signals” on
page 49.

GEN-LOCK indicator

When the output signal format is PAL or NTSC and GEN
LOCK is set to ON on the menu screen, the GEN-LOCK
indicator lights or flashes.

Location and function of parts and controls

ON/OFF (power) switch and indicator

Press to turn the unit on and off.
The indicator on the switch lights when the unit is turned
on.

COMMAND MODE selector

When using the remote commander supplied with the
Sony monitor or TV, set it to TV.
When using the remote commander supplied with the
Sony projector, set it to PJ.
When not using the remote commander, set to OFF.

DISPLAY ON/OFF button and indicator

Press this button to turn on the indicator (DISPLAY ON) to
display the current operating mode on the screen.
Press it again to turn off the indicator to eliminate the
display (DISPLAY OFF).

Note

The main menu appears by pressing the MENU button,
even if the DISPLAY OFF mode is selected.

TEST PATTERN button and indicator

Press this button to turn on the indicator to display the test
pattern on the screen.
To turn off the test pattern, press the TEST PATTERN
button repeatedly until no test pattern is displayed, or
press the ON/OFF, INPUT SELECT or OUTPUT
FORMAT button.

LINE DOUBLER button and indicator

When the input signal format is NTSC or PAL, press this
button to turn on the indicator and activate the line doubler
function. Press it again to turn off the indicator and cancel
the line doubler function.

Format name

NTSC
PAL
VGA 640

480

VESA 800

600

VESA 1024

768

VESA 1280

1024

HDTV 1920

1080

OUT indicator